1. Process
This is a full refined paraffin wax product made from natural crudeased oil containing wax through the processÂ
steps of solvent deoiling and hydrotrating.
Â
2. Product futures
The product is an odorless solid under ambient temperature, can be molten by heating. The product isÂ
combustible,of low thermal and electric conductivity and strong moisture hold-up.
Â
3. Suggested usages
The product is widely used in manufacturing of HF ceramic, carbon paper, stylus paper, precise casting,andÂ
absorbing decoration plate etc, as well as in packaging, electronic, textile, candle, crayon, match and otherÂ
industry fields. In addition, it can be used as raw material, additive or modifier in fabrication of luxury candlesÂ
and various kinds of industrial or civil use candles, also as raw ingredient in formulation of face cream andÂ
other many cosmetics.
Â
4. Main quality specification
Item |
Value |
Test method |
|||||||||
Grade |
#52 |
#54 |
#56 |
#58 |
#60 |
#62 |
#64 |
#66 |
#68 |
#70 |
|
Melting point, °C ≥ |
52 |
54 |
56 |
58 |
60 |
62 |
64 |
66 |
68 |
70 |
GB/TÂ 2539 |
Oil content, %(mass) |
≤0.5 |
GB/TÂ 3554 |
|||||||||
Color, Saybolt scale |
≥+27 |
≥+25 |
GB/TÂ 3555 |
||||||||
Photolabile number |
≤4 |
≤5 |
SH/TÂ 0404 |
||||||||
Penetration, (25°C),1/10mm |
≤19 |
≤17 |
GB/TÂ 4985 |
||||||||
Kinematic viscosity, (100°C),m/s |
Report |
GB/TÂ 265 |
|||||||||
Odor number |
≤1 |
SH/TÂ 0414 |
|||||||||
Water soluble acid/base |
Not detected |
SH/TÂ 0407 |
|||||||||
Mechanical impurity & moisture |
Not detected |
Visual inspection |
Â
Natural Veneer is a thin sheet of wood, rotary cut, sliced or sawed from expensive natural wood. The veneer is easy to be edge jointed and overlaid on Plywood, MDF , particleboard and so on. So, it can be used in fancy plywood, fancy MDF, fancy Blockboard and veneer faced particleboard.
Luli Group Co., Ltd, also supply engineered wood veneers with good quality and competitive pricing.
Advantages of using Natural veneers:
Compared to wood, one of the primary advantages of using veneer is stability. While solid wood can be prone to warping and splitting, because veneer is made of thin layers of wood glued together, the chances of splitting or cracking are reduced. Further, the glue used provides additional strength, making the end result stronger than natural wood.And we have Professional Natural Veneer and Natural Wood Veneer.
Usages of Natural Veneer:
Used to cover the surface of plywood, MDF, chipboard, blockboard and so on.
Specification details:
Sizes: 1220mm x 2440mm, 1250mm x 2500mm or as your request
Thickness: From 0.15mm to 0.6mm or as per request
Species: Okoume, Bintangor, Terminalia, Red hardwood, etc.
Grade available: A/A, A/B, B/B
Cutting way: Rotary cutting
Natural Veneer,Natural Walnut Wood Veneer,Professional Natural Veneer,Natural Wood Veneer
Luli Group Co.,Ltd. , https://www.cnluli.com