Home>Bearing knowledge> Common terms and definitions of rolling bearings (6) |
Common terms and definitions of rolling bearings (6)
Source: China Bearing Network Time: 2014-01-22
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
ㄒ唬┲岢信渲1. Paired device paired mounting
The two sets of tumbling bearing ends face a device on the same axis as the end face; it can be regarded as a whole when working. The bearing can be back-to-back, face-to-face or in series.
2. Combination device
Three or more sets of rolling bearing ends face a device on the same axis as the end face; it can be regarded as a whole when working.
3. Back-to-bacd arrangement
Two sets of rolling bearings adjacent to the outer ring of the opposite side of the device approach.
4. Face-to-face arrangement
Two sets of tumbling bearings adjacent to the outer ring front facing the front of the device approach.
5. Tandem arrangement
The set of bearing outer ring of two or more sets of rolling bearings is opposite to the front of the outer ring of the next set of bearings.
6. Paired match pair
Two sets of rolling bearings selected or made according to a predetermined characteristic (generally according to preload or clearance); and installed together according to the rules.
7. Matching stacked stack
Three or more sets of rolling bearings are rated according to their characteristics; generally selected or produced according to preload or clearance; and installed together according to the rules.
Ǘ┓ æ¤è€ƒ1. Sub-unit
A bearing ring or bearing washer with a cage or rollover that can be freely removed from the bearing; a roll and cage assembly that can be freely removed from the bearing.
2. Interchangeable sub-unit
A sub-assembly can be exchanged by other sub-components of the same group without affecting the function of the bearing.
3. Inner ring cage and ball (roller) assembly inner ring cage and ball (roller) assembly
a sub-assembly consisting of an inner ring, a ball (roller) and a cage.
4. Conical inner ring assembly cone assembly
a sub-assembly consisting of a conical inner ring, a tapered roller and a cage.
5. Outer ring, cage and ball (roller) assembly outer ring cage and ball (roller) assembly
a sub-assembly consisting of an outer ring, a ball (roller) and a cage.
6. Needle roller bearing without inner ring needle roller bearing without inner ring
A sub-assembly consisting of an outer ring and a full-loaded needle or an outer ring and a needle and cage. When required, the bearing replenishment can be added to this section; for example: "needle bearing; full ; stamped outer ring; no inner ring "or" needle roller bearing has cage; mechanism ferrule; no inner ring".
.ㄈ┕龆æ´æ…3 èŒæ¦§1. Rolling element and cage assembly
a sub-assembly consisting of a roll cage and a cage.
2. Ball (roller) and cage assembly ball (roller) and cage assembly
A sub-assembly consisting of a rolling element and a cage of a ball (roller) bearing; when not specifically used for a radial bearing or a thrust bearing.
3. Ball and cage radial (thrust) assembly ball and cage radial (thrust)assembly
Ball and cage assembly for centripetal (thrust) ball bearings.
4. Roller and cage radial (thrust) assembly roller and cage radial (thrust) assembly
Roller and cage assemblies for radial (thrust) roller bearings. When required; roller types can be added to this section; for example "needle and cage thrust assemblies" or "cylindrical rollers and cages centripetal Component".
Recommend to friends comments close window
Bearing related knowledge |
Bearing general view preparation work linear bearing series analysis NTN bearing support frame effect and layout characteristics bearing type suitable for project analysis FAG company bearing make up code |
This article links to http://
Please indicate the bearing network http://
Previous:NTN bearing burnout inspection analysis and avoidance method Next: SKF bearing division
The Temporary Fence Clamp is the connection of Temporary Fence panel.
and it can match the 32mm pipe,42mmm pipe.
Its features and advantage :
1.Anti rust:the surface treatment 42 microns Resist the evil environment
2.Convinient:Easy install the Temporary fence panel
3.Strong:Resist great pressure
Its is usually use for connect the temporary fence panel,and its surface traetment:hot-dipped ,Dacromet,pvc coated,powder coated
Temporary Fence Clamp
Temporary Fence Clamp,Temporary Fence Clips,Australia Temporary Fence Clamp,Temporary Fence Connection
Anping Deming Metal Net Co.,Ltd , https://www.wovenfence.nl