With the continuous improvement of material life, people pay more and more attention to decoration, from the previous laying of ceramic tiles to the laying of wooden flooring. Wood floor maintenance is skillful. After 10 years of maintenance, the wooden floor is still bright and beautiful. On the contrary, it will lose its brilliance in a few years. Let's take a look at the dehumidification of the wooden floor!
First, the pepper removal method
Applicable space: The living room faces the uncomfortable return to the South, Guangzhou folks have always had a tradition.
Moisture-proof method: One is to place the dried pepper, which can absorb a certain amount of water, but must always replace the new dried pepper. The other is to place a reliable quality cannon, because there is sulfur in the cannon, which can not only dehumidify but also remove insects.
Reminder: Although the effect of "earthwork" is good, there are safety problems in the artillery, and people should be more careful when using it. In addition, you can also burn a pot of fire in the room to increase the temperature inside the room, so that the water vapor can not condense, thus reducing the indoor humidity.
Second, the newspaper anti-mildew method
Applicable space: The weather in the bedroom is damp, and the clothes in the closet are often moldy. What should I do?
Moisture-proof method: Open the door of the wardrobe for a long time, it can be ventilated and mildewproof, but there is also a lot of dust. For example, put a newspaper on the bottom of the closet, or even put a newspaper on the inside of the closet. The newspaper absorbs moisture and achieves mildew resistance, and the ink on the newspaper can also deworm.
Tips: Newspapers should avoid direct contact with clothing to prevent contamination with ink.
Third, lime moisture absorption method
Applicable space: kitchen, bedroom lime is a simple and easy to do moisture absorber.
Moisture proof: 1 kg of quicklime can absorb about 0.3 kg of water in the air. Put the lime in a wooden box and cover it when the weather is not wet. When the weather is wet, open the cover and do not open the large window to keep the indoor air dry and pleasant.
Tips: For the average family, buy 5-10 kg of lime, put it in a wooden box or carton, put it under the closet or in the corner of the house, but be careful not to let the children at home take it.
Fourth, salt and salt mopping method
Applicable space: kitchen, bathroom kitchen.
Moisture-proof practices: Salt is also a good dehumidifier. Although there is no industrial salt snow melting and ice removal, salt is more than enough to deal with the dampness of the home.
Tips: Use hot water and salt to mop the floor. This method can accelerate the evaporation of water.
TCI Tricone Bit include Rubber sealed bearing Tricone Bit , metal sealed bearing tricone bit , journal bearing tricone bit and roller bearing tricone bit
HA Rubber sealed bearing tricone bit Main structure features
1.Journal bearing. Hardfaced head bearing surface. Inner hole of cone is silver-plated. The load capacity and seizure resistance of the bearing is greatly improved. O ring seal is made of the more wear resistance high saturated buna-N with the increased seal section and precisely designed sealing flange in the cone desling area increased the reliability of the seal.
2.All rubber compensator is used which i\can limit pressure differential and prevent drilling fluid from entering the lubrication system and this provides the bearing system with good assurance of lubrication.
3.High wear resistance and excellent cutting ability of the insert bit are given full play by using carbide compacts of high strength and high toughness in combination with optimized compact numbers and rows,the exposure height and special shaped compacts. For steel tooth bit the tooth surface is hardface with new type of wear resistant material and thus extended working life of the cutting structure while still maintaining high ROP.
4.A row of inserts is added between gauge row and heel row of HA bit to trim borehole wall and protect cone shell and consequently,the special HAT series bit is formed.
HJT bit metal seal with journal bearing structure features
HJT series bit adopts metal seal with journal bearing which can drill stably with higher rotary speed.
1.Metal face seal journal bearing tricone bit . New professes of head bearing hardfacing and cone bearing silver plating are used to improve the load capacity,anti-galling ability and stability of the bearing.
2.Various shapes of inserts can be equipped on this series of bits,including scoop inserts,wedge inserts,conical-spherical inserts and double spherical inserts,etc.Drilling process & formation and bit are efficient integrated by scientific insert shape selection to realize safety and high efficient drilling.
3.A row of inserts is added between gauge row and heel row of HJ bit to trim borehole wall and protect cone shell,and as a result,HJT series bit is formed.
Rubber sealed journal bearing tricone bit Feature and application
HA417 437Formation: Very soft with low compressive strength and high drillability, such as shale,clay,sandstone and conglomerate,etc.
Normal WOB KN/mm (bit dia): 0.35~0.90
RPM:140~70 r/min
HA 517 527Formation:Soft with low compressive strength,such as shale,clay,sandstone,soft limestone,salt bed and hard gypsolyte,etc
Normal WOB KN/mm (bit dia): 0.35~1.05
RPM:120~50 r/min
HA537 547Formation: Medium soft with low compressive strength and harder abrasive stringers,such as hard shale,hard gypsolyte,soft limestone,sandstone and dolomite with stringers,etc
Normal WOB KN/mm (bit dia): 0.35~1.05
RPM:110~40 r/min
HA 617 627 Medium hard with high compressive strength and thick &hard stringers,such as hard shale,limestone,sandstone and dolomite,etc
Normal WOB KN/mm (bit dia): 0.35~1.05
RPM: 80~40 r/min
HA 637 Medium hard with high compressive strength and high abrasiveness ,such as limestone ,dolomite,sandstone and chert ,etc
Normal WOB KN/mm (bit dia): 0.70-1.20
RPM:70~40 r/minium hard with high compressive strength and high abrasiveness ,such as limestone ,dolomite, sandstone and chert ,etc
Normal WOB KN/mm (bit dia): 0.40~0.80
Rotary speed :180~80 r/min
The IADC code of TCI tricone bit
IADC HA 417,HA 427, HA 437, HA517, HA527, HA537, HA 547 ,HA617, HA627, HA637. IADC GA 435, GA 535, GA 635
HJ 417,HJ 427, HJ 437, HJ 517, HJ 527, HJ537, HJ547 ,HJ617, HJ627, HJ637. IADC GJ 435, GJ 535, GJ 635
The size of tricone bit
NO. |
Tricone bit size |
Thread sizes |
NO. |
Tricone bit size |
Thread sizes |
||
Inch |
mm |
inch |
mm |
||||
1 |
3-3/4 |
95.3 |
2-3/8 |
28 |
9-5/8 |
244.5 |
6-5/8 |
2 |
3-7/8 |
98.4 |
29 |
9-7/8 |
250.8 |
6-5/8 |
|
3 |
4-1/8 |
104.8 |
30 |
10-1/2 |
266.7 |
||
4 |
4-1/4 |
108.0 |
31 |
10-5/8 |
269.9 |
||
5 |
4-1/2 |
114.3 |
32 |
11 |
279.4 |
||
6 |
4-5/8 |
117.5 |
2-7/8 |
33 |
11-5/8 |
|
|
7 |
4-3/4 |
120.7 |
34 |
12 |
304.8 |
||
8 |
4-7/8 |
123.8 |
35 |
12-1/4 |
311.2 |
||
9 |
5-1/2 |
139.7 |
3-1/2 |
36 |
12-5/16 |
|
|
10 |
5-5/8 |
142.9 |
37 |
12-3/8 |
314.3 |
||
11 |
5-2/3 |
143.9 |
38 |
12-7/16 |
315.9 |
||
12 |
5-3/4 |
146.1 |
39 |
12-5/8 |
320.7 |
||
13 |
5-7/8 |
149.2 |
40 |
13-1/8 |
333.4 |
||
14 |
6 |
152.4 |
41 |
13-1/2 |
342.9 |
||
15 |
6-1/8 |
155.6 |
42 |
13-5/8 |
346.1 |
||
16 |
6-1/4 |
158.8 |
43 |
13-3/4 |
349.3 |
||
17 |
6-1/2 |
165.1 |
44 |
14-1/2 |
374.7 |
7-5/8 |
|
18 |
6-5/8 |
168.3 |
45 |
14-3/4 |
374.7 |
||
19 |
6-3/4 |
171.5 |
46 |
15-1/2 |
393.7 |
||
20 |
7-1/2 |
190.5 |
4-1/2 |
47 |
16 |
7-5/8 |
|
21 |
7-5/8 |
193.7 |
48 |
17-1/2 |
444.5 |
||
22 |
7-7/8 |
200.0 |
49 |
18-7/8 |
479.4 |
||
23 |
8-3/8 |
212.7 |
50 |
20 |
508.0 |
||
24 |
8-1/2 |
215.9 |
51 |
22 |
558.8 |
||
25 |
8-5/8 |
219.1 |
52 |
24 |
609.6 |
||
26 |
8-3/4 |
222.3 |
53 |
26 |
660.4 |
||
27 |
9-1/2 |
241.3 |
TCI Tricone Bit
TCI Tricone Bit, TCI Tricone Drill Bit, TCI Tricone Rock Drill Bits, API TCI Tricone Bit
Hejian Deris Petroleum Drilling Equipment Co.,Ltd. , https://www.welldrillingbit.com