The balancer can perform dynamic balance on the whole machine for various rotating machines, which is equivalent to a movable balancing machine. It is designed to be portable and convenient. The entire instrument is just a briefcase from the outside. There are many vibrations that cannot be measured with simple instruments, such as the neighboring disturbance frequency being too close, the rotor rotating speed unstable or inaccessible. However, the use of a dynamic balancer provides the most accurate measurement accuracy even under the most adverse conditions.
1. Keep the function of the | key in the measurement process
During the measurement process, the measured parameter may change, which causes the parameter value displayed on the LCD to flicker. For this purpose, you can press / hold | to fix the parameter at a certain moment for observation or selection. At this time, The * mark appears in the upper right corner of the LCD screen. If you press the | Enter key, it will enter the next process. If you press the | hold | key again, the * mark will disappear and the LCD screen number will continue to flash.
If you are satisfied with the measured amplitude value in the dynamic balance measuring instrument , you can press | hold | key to keep the data on the display, (if you press again | keep | key to re-enter the measurement state), then press | Car|Keys are stored by the computer and prompt you for the next step.
2. Speed ​​effective value (RMS) and shift peak-to-peak measurement switching
In the measurement state, press the |+| key to cycle between the effective rms value (RMS) and the peak-to-peak displacement (Vp-p). Each time you press the |+| key to switch.
3. Magnification selection
In the measurement state, the ×n value displayed in the upper left corner of the LCD screen is the magnification. Press and to reselect the magnification. The magnification of the instrument can be selected in four steps: x0.1, x1, x10 and x100.
4 preset speed
In the dynamic balance measurement, when the actual speed ≥ the preset speed, the instrument enters the hold state, which is equivalent to pressing the |Keep|.
5. Channel switching
In the vibration measurement, the switching of the A channel and the B channel is realized by using the ? key. In the dynamic balance measurement, the single plane measurement is fixed in the A channel, and the channel switching of the dual plane measurement is performed automatically.
6. Overflow indication
During the measurement process, if there are 999 digits on the display, it means the measurement overflows, and then the range should be switched.
7. Sensor selection
If you need to use the eddy current displacement sensor during the measurement, after the power is turned on, when the dynamic balance measuring instrument is displayed on the display, press | hold|. When the sensor selection appears on the display, select the displacement sensor. The default value of the instrument is the speed sensor.
Welding Hose mainly used in welding and cutting equipment delivery in the oxygen and acetylene gas. Air conditioning replacement of ice species.The Flexible Single Welding Hose tube is soft, matte surface ,the outer of layer is red and blue or red and green, lightweight, spark concentration, cotton reinforcement, non- flammable.It has the advantage elastic ,flexible ,resistance , wear resistance , corrosion resistance , the tube surface with smooth or strip.
Welding Hose
Welding Hose,Flexible Single Welding Hose,Flexible Oxygen Hose And Acetylene Hose,Pvc Welding Hose
Zhanjiang QITAI Industry & Trading Co., Ltd. , https://www.qitaihose.com