In recent years, the application of solar energy (PV) power generation has become increasingly widespread and has developed rapidly. Apart from major equipment such as photovoltaic modules, inverters and step-up transformers in the construction of photovoltaic power plants, the connected photovoltaic cable materials are applied to the entire photovoltaic power station. The profitability, safety of operation, and efficiency are also of crucial importance. The following is a detailed introduction to the uses and environments of cables and materials commonly used in photovoltaic power plants.
The cables can be divided into DC cables and AC cables according to the system of the photovoltaic power station. They are classified according to their different uses and environments:
1. DC cable
(1) A series cable between components and components.
(2) Parallel cables between strings and their strings to DC distribution boxes (confluence boxes).
(3) The cable from the DC distribution box to the inverter.
The above cables are all DC cables. They are laid outdoors in large quantities and need to be protected from moisture, sunlight, cold, heat, and UV rays. In some special circumstances, they must also be protected against acids and alkalis.
2. AC cable
(1) Connecting cable from inverter to step-up transformer.
(2) Connecting cable from step-up transformer to power distribution unit.
(3) The connection cable from the power distribution unit to the grid or user.
This part of the cable is an AC load cable, and there are many indoor installations. It can be selected according to the general power cable selection requirements.
3. Photovoltaic special cable
A large number of DC cables in photovoltaic power plants need to be laid outdoors, and the environmental conditions are harsh. The cable materials should be determined according to UV resistance, ozone, severe temperature changes, and chemical erosion. The long-term use of cables with common materials in this type of environment will result in fragile cable jackets and even breakdown of cable insulation. These conditions can directly damage the cable system, and at the same time increase the risk of short-circuiting the cable. In the medium and long term, the possibility of fire or personal injury is also higher, which greatly affects the service life of the system.
Therefore, it is very necessary to use photovoltaic dedicated cables and components in photovoltaic power plants. With the continuous development of the photovoltaic industry, the photovoltaic component market has gradually taken shape. In terms of cables, a variety of photovoltaic professional cable products have been developed. The recently developed electron beam cross-link cable, rated at 120°C, withstands harsh weather conditions and withstands mechanical shocks. Another example is RADOX cable is a solar energy special cable developed according to the international standard IEC216, in the outdoor environment, the service life is 8 times that of the rubber cable, 32 times that of the PVC cable. Photovoltaic-dedicated cables and components not only have the best weather resistance, UV and ozone resistance, but also withstand a wide range of temperature changes (for example, from -40 to 125°C). In Europe, technicians have tested that the temperature measured on the roof can reach 100-110°C.
4. Cable conductor material
The DC cables used in photovoltaic power stations are often used outdoors for long-term work. Due to the restrictions of construction conditions, the cables are often connected using connectors. Cable conductor material can be divided into copper core and aluminum core. Copper core cable has better oxidation resistance than aluminum, long service life, better stability, low pressure drop and small power loss; due to the good flexibility of the copper core in construction, the allowable radius of curvature is small, so the turning is convenient and the pipe is worn Easy to use; and the copper core is resistant to fatigue and difficult to break due to repeated bending; therefore, the copper core has high mechanical strength and can withstand large mechanical pulling force, which brings great convenience to construction and laying a foundation for mechanized construction. . On the contrary, the aluminum core cable, due to the chemical properties of the aluminum material, is prone to oxidation (electrochemical reactions) in the mounting joints, and is particularly prone to creep phenomena, which can easily lead to failures.
Therefore, copper cables have outstanding advantages in the use of photovoltaic power plants, especially in the field of direct-buried laying of cable power. It can reduce the accident rate, improve the reliability of power supply, and facilitate the construction operation and maintenance. This is the reason why the main use of copper cables in underground power supply is currently in China.
5. Cable insulation sheath material
During the installation, operation, and maintenance of photovoltaic power plants, cables may be routed in the soil below the ground, overgrown with weeds, on the sharp edges of the roof structure, and exposed to the air. The cables may be subject to various external forces. If the strength of the cable sheath is not sufficient, the cable insulation will be damaged, which will affect the service life of the entire cable or cause short circuit, fire and danger of personal injury. Cable technicians found that cross-linked materials have higher mechanical strength than radiation treatment. The cross-linking process changed the chemical structure of the cable insulation jacket material polymer, the meltable thermoplastic material was converted to a non-meltable elastomer material, and the cross-link radiation significantly improved the thermal, mechanical and chemical properties of the cable insulation material. characteristic.
In operation, the DC loop is often affected by various unfavorable factors and causes grounding, making the system unable to operate normally. Such as extrusion, poor cable manufacturing, insulant material failure, low insulation performance, insulation aging of the DC system, or the presence of certain damage defects can cause grounding or become a grounding hazard. In addition outdoor environment, small animals invade or bite can also cause DC ground fault. Therefore, in this case, armored, cabled with a rodent protection functional sheath is generally used.
Shenzhen Fu Sheng Electric Co.,LTD.is professional manufacturer of DC/AC/EC containing brush less axial compressor,cross current flow,centrifugal cooling fan.
The cooling fan includes DC cooling fan, AC Fan, axial flow fan, internal DC Fan adopts double ball bearing and oil bearing structure, quality, DC cooling fan with low loss, high efficiency, high power factor, good speed performance, simple control, inverter capacity the characteristics of the low and widely used. The direct current cooling fan is widely applied to equipment, instruments and machines which need ventilation and heat dissipation.
Product show:
Product description:
Feature:
(1)Small loss and high efficiency;
(2)High power factor;
(3)Good speed control performance and simple control;
(4)The inverter has low capacity, so the cost of the inverter is low.
Typical Applications:
Widely used in computer, communication products, photoelectric products, consumer electronics, automotive electronics, medical equipment, exchanger, heaters, air conditioners, inverter, automatic teller machine, car refrigerator, welding machine, electromagnetic oven, audio equipment, environmental protection equipment, refrigeration equipment and other traditional or modern equipment.
Specification:
Model
Bearing
Rated voltage(v)
Rated current
(A)
Rated
Nominal speed
(RPM)
Air flow
(CFM)/(m^3/min)
Air pressure
Noise
(dB)
Weight(g)
FS3010
sleeve/ball
5/12
0.08~0.15
0.50~1.44
6000~10000
2.46~4.10
0.07~0.11
2.00~4.52
0.08~0.18
18.0~29.0
8
FS4010
sleeve/ball
5 /12/24
0.04~0.28
0.72~1.44
5000~7000
4.85~6.66
0.14~0.19
2.52~4.55
0.09~0.18
20.0~28.0
18
FS4020
sleeve/ball
5 /12/24
0.04~0.28
0.72~1.44
5500~7500
6.42~8.85
0.18~0.25
3.52~5.25
0.14~0.21
26.0~30.0
25
FS4028
sleeve/ball
12/24
0.12~0.35
2.16~6.00
8000~10000
11.45~14.31
0.32~0.40
6.85~8.55
0.27~0.34
34.0~38.0
35
FS5010
sleeve/ball
5 /12/24
0.05~0.3
0.70~2.16
3400~5300
7.20~10.20
0.20~0.29
2.02~3.65
0.08~0.14
21.0~33.0
18
FS5015
sleeve/ball
5 /12/24
0.06~0.33
1.0~2.40
4000~6000
8.25~12.25
0.23~0.34
2.30~5.43
0.09~0.21
26.0~35.0
25
FS6010
sleeve/ball
5 /12/24
0.07~0.35
0.85~2.64
3000~4200
11.25~20.25
0.32~0.57
1.72~2.55
0.06~0.08
26.0~28.0
25
FS6015
sleeve/ball
5 /12/24
0.08~0.40
0.75~3.60
3500~4500
16.25~20.52
0.46~0.57
2.15~2.75
0.08~0.11
27.0~35.0
30
FS6020
sleeve/ball
12/24
0.08~0.16
0.92~3.12
3000~4200
13.15~16.71
0.37~0.47
2.52~3.18
0.10~0.13
27.0~33.0
45
FS6025
sleeve/ball
12/24
0.09~0.19
0.84~4.58
2500~4500
15.8~27.05
0.44~0.76
3.51~10.12
0.14~0.40
27.0~41.0
55
FS7015
sleeve/ball
12/24
0.12~0.35
1.92~4.2
3000~4200
24.8~33.52
0.69~0.94
2.50~3.33
0.09~0.13
30.0~40.0
45
FS7025
sleeve/ball
12/24
0.10~0.35
1.80~7.2
3000~4500
24.00~36.12
0.67~1.01
2.65~4.80
0.10~0.18
31.0~42.0
50
FS8015
sleeve/ball
12/24
0.09~0.17
1.08~3.60
2000~3000
24.30~33.12
0.68~0.93
2.51~3.53
0.09~0.13
25.0~32.0
45
FS8020
sleeve/ball
12/24
0.12~0.23
1.56~5.04
2500~3500
30.50~41.30
0.29~1.15
4.05~7.61
0.15~0.29
26.0~38.0
60
FS8025
sleeve/ball
12/24/48
0.07~0.25
0.96~7.2
2000~3500
26.80~44.00
0.75~1.23
1.91~4.81
0.07~0.18
23.0~37.0
60
FS8038
sleeve/ball
12/24/48
0.70~0.12
2.76~9.60
3400~5000
45.20~68.81
1.26~1.93
7.13~15.35
0.28~0.60
39~49
140
F9225
sleeve/ball
12/24/48
0.07~0.50
1.92~6.24
2000~3200
38.80~85.55
1.08~2.39
2.18~4.81
0.08~0.18
23.0~50.0
75
FS1225
sleeve/ball
12/24/48
0.10~0.55
2.10~10.80
1800~3000
68.45~150.11
1.92~4.20
2.68~5.82
0.11~0.23
32.0~50.0
145
FS1238
sleeve/ball
12/24/48
0.06~0.4
2.76~9.6
2400~3000
84.76~125.32
2.4~5.5
4.56~9.85
0.18~0.38
34~46
270
FS1238-P
sleeve/ball
48
0.78~1.28
37.44~61.44
4800~5800
200.28~245.83
5.671~6.961
38.16~25.92
1.020~1.502
67.0~71.5
393
FS1751
sleeve/ball
12/24
1.0~3.0
20.4~36.0
2500~3300
174.0~226.50
4.87~6.34
10.40~19.40
0.41~0.76
47.0~55.8
720
Imput
power(W)
More products:
Company picture:
If you have any questions, please contact with us directly.
Welcome you can visit our Factory.For inquiry,Please send mail directly to us.
Dc Cooling Fans, Low Noise Dc Cooling Fans,24V Dc Cooling Fan,High Speed Dc Cooling Fans
Shenzhen Fusheng Motor Co.,Ltd , http://www.fushengfan.com