In the daily decoration of home, the choice of wallpaper may be more confused, and the use of some techniques can make shopping easier. Let's take a look.
Tip 1: The old wallpapers that come with some specials are mainly processed products with little stock. These wallpapers have no shortcomings, except that they are not beautiful. Therefore, they can be used in closet rooms, secondary bedrooms, study rooms, nanny rooms and other less important rooms. The new wallpaper is used in the entrance, living room and other places. For high-priced wood fiber wallpaper or fabric wallpaper is used in the master bedroom and the elderly room, children's room. The use of wallpaper will not cause overspending troubles.
Tip 2: The length of the general wallpaper is 10 meters/volume, which means that if you subtract 810 centimeters from the kick, it means that a roll of wallpaper can get out of a room with 2.55 meters high. If the net height of the room exceeds 2.55 meters, only 3 pieces will be left. A loss of 2 meters or so will be left in each roll. The loss rate is as high as 20%. Therefore, if the net height of the room is relatively high, then the loss-containing paving method is selected. It is very cost-effective.
Tip 3: Demolish the Western Wall Western Wall If the developer submits the rough houses are all walls with waterproof putty, then the method of saving money comes, because the wall surface treatment requirements of the wallpaper are not as stringent as the latex paint. If there is no obvious white slag drop by hand, there is no water seepage when a small glass of water is poured, and then the wall surface is flat. You can only allow workers to grind the wall surface, and then paint directly on it. Varnish on the line. In this case, the price of the reconstructed material is less than half of the putty-treated wall, and the remaining money per square meter is enough to purchase a wallpaper version with grades.
Tip 4: Ingeniously avoiding wallpapers, general decoration companies recommend the use of plaster lines. I am afraid that the connection between the wallpaper and the roof is not smooth. However, in fact, the plaster line is completely unnecessary.
1. The wallpaper and latex paint are directly connected. Prepare a transparent ruler more than 30 centimeters in advance and make sure that it can be cut even more when cutting. After the shop is finished, there are spots where workers can use the wallpaper knife to repair it.
2. Replace the plaster line with a waistline. The waist line is not necessarily used in the middle. The best place to look at the waist is 20-30 cm below the roof.
3. There is also a way to save the gypsum line and increase the room height: Use white matt latex paint on the walls and the roof over 20 cm above the roof, and use a waistline or a 5 cm wide gypsum board at the joint. Pressure seams. For people who have a net room height of 2.6 meters or more and do not want to burden them too much, this treatment can well reduce headaches caused by high wallpaper loss.
Xiao Bian concludes: The purchase of wallpaper is not just appearance, but there are still collocations to pay attention to, as well as the pitfalls, must be careful.
Tip 1: The old wallpapers that come with some specials are mainly processed products with little stock. These wallpapers have no shortcomings, except that they are not beautiful. Therefore, they can be used in closet rooms, secondary bedrooms, study rooms, nanny rooms and other less important rooms. The new wallpaper is used in the entrance, living room and other places. For high-priced wood fiber wallpaper or fabric wallpaper is used in the master bedroom and the elderly room, children's room. The use of wallpaper will not cause overspending troubles.
Tip 2: The length of the general wallpaper is 10 meters/volume, which means that if you subtract 810 centimeters from the kick, it means that a roll of wallpaper can get out of a room with 2.55 meters high. If the net height of the room exceeds 2.55 meters, only 3 pieces will be left. A loss of 2 meters or so will be left in each roll. The loss rate is as high as 20%. Therefore, if the net height of the room is relatively high, then the loss-containing paving method is selected. It is very cost-effective.
Tip 3: Demolish the Western Wall Western Wall If the developer submits the rough houses are all walls with waterproof putty, then the method of saving money comes, because the wall surface treatment requirements of the wallpaper are not as stringent as the latex paint. If there is no obvious white slag drop by hand, there is no water seepage when a small glass of water is poured, and then the wall surface is flat. You can only allow workers to grind the wall surface, and then paint directly on it. Varnish on the line. In this case, the price of the reconstructed material is less than half of the putty-treated wall, and the remaining money per square meter is enough to purchase a wallpaper version with grades.
Tip 4: Ingeniously avoiding wallpapers, general decoration companies recommend the use of plaster lines. I am afraid that the connection between the wallpaper and the roof is not smooth. However, in fact, the plaster line is completely unnecessary.
1. The wallpaper and latex paint are directly connected. Prepare a transparent ruler more than 30 centimeters in advance and make sure that it can be cut even more when cutting. After the shop is finished, there are spots where workers can use the wallpaper knife to repair it.
2. Replace the plaster line with a waistline. The waist line is not necessarily used in the middle. The best place to look at the waist is 20-30 cm below the roof.
3. There is also a way to save the gypsum line and increase the room height: Use white matt latex paint on the walls and the roof over 20 cm above the roof, and use a waistline or a 5 cm wide gypsum board at the joint. Pressure seams. For people who have a net room height of 2.6 meters or more and do not want to burden them too much, this treatment can well reduce headaches caused by high wallpaper loss.
Xiao Bian concludes: The purchase of wallpaper is not just appearance, but there are still collocations to pay attention to, as well as the pitfalls, must be careful.
Secondary tinplate is also well packed with sea-worthy packaging. Secondary tinpalte sheet can be cut to your length, and quick delivery with good prices.
1. Technical standard: BS EN 10202, DIN EN 10203, GB/T2520 , JIS G3303
2. Steel type: MR, SPCC3. Thickness: 0.115 - 0.50 mm
4. Width: 600 - 1050 mm
5. Length: 600-1200mm
Tin Coating: ordinary 2.8 or 2.8g and 5.6g or 5.6g, we can produce according to customer's requests
Secondary Electrolytic Tinplate Sheet
Secondary Electrolytic Tinplate Sheet,Tinplate For Paint Can,Secondary Grade Electrolytic Tinplate Coil,Etp Electrolytic Tinplate Sheet
Jiangsu Guolian New Material Co., Ltd. , http://www.cntinplate.com