Solid wood furniture has always been the darling of the furniture industry. It has the advantages of natural environmental protection, sturdiness and durability. It can be a beautiful and practical work with careful manufacture of good materials. Because of the high price, solid wood furniture is a symbol of grade and identity in many consumers' minds, but now many consumers can't tell the difference between solid wood furniture and general panel furniture, and it is not clear how to buy it. Really good quality solid wood furniture. So how to choose solid wood furniture? This is a question a lot of friends to buy solid wood furniture is not met, today we look at it with the view of the East Yi teach you how to choose the right wood furniture.
1. Determine if the furniture is really made of solid wood.
A mystery to determine whether solid wood furniture is: wood grain and knots. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
2. Determine what kind of tree is made of solid wood.
This is a direct impact on price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while precious mahogany furniture mainly uses rosewood, wenge, and rosewood. The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap.
3. Observe the pros and cons of wood.
Open the furniture cabinet door and drawer to observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell.
4. Observe the wood for defects.
The main force-receiving parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails.
5. Observe the strength of the board.
The surface of the board can be pressed with a finger to feel the fastness of the board. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The drawer bottom plate should be pressed by hand to test the strength. Generally, the bottom of the partition plate is multi-layered, and the area is large. The partition should be made of five-layer board. Doors and drawer switches should be flexible. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the surface paint film of the product is not allowed to wrinkle, stick and leak paint.
6. Check stability and safety.
Observe whether there is a tilt of the drawer or the door frame, whether there is a skew of the eye caused by the twisted eye socket or the eye hole is too large, and the hoe is not strict. Wooden furniture should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You should push the top corner of the furniture or sit on one side and try to make sure the furniture is firm.
7. Check the interface.
It is advisable to use a dovetail joint or a butterfly joint. Heavier furniture should be screwed with a protective block in the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.
8. Check the slides and latches of the drawer.
The drawer should be solid and secure with the screws tightened inside. Pull out the drawers, the movable tabletop, the door and other parts to ensure that they can be used freely and properly connected.
9. Check the surface.
Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, avoid the roughness of the table legs, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.
10. Turn the furniture upside down.
Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the slats tightly attached to the crosspieces? There are no excess glue or filler in the seams.
The above is the skill of choosing the solid wood furniture for the Orientals. I hope that I can provide some help for the purchase of the belt. For more information, please look forward to the follow-up report of Xiaojiaju.com.
NY400 Asbestos Gasket Sheet for Oil-Resisting
Description:NY400 Asbestos Gasket Sheet for Oil-Resisting is high temperature and high pressure oil resisting materials,it can be green,black and blue colour and can cut difference size as per clients' requestmade,it made by good asbestos fiber with oil resistance synthetic rubber ,compression heating and molding it in thick paper fashion.
Usage:NY400 Asbestos Gasket Sheet for Oil-Resisting is suitable for the mediums temperature under 400â„ƒ,pressure under 4.0MPa in gasoline,mineral oil,fuel,chemical solvent oil,alkali etc transmitted in the joints of facilities and pipelines.
4100Ã—1500mm; 4500 x 1500mm;2000Ã—1500mm;
Lateral Tensile Strength MPa â‰§15.0
Compressibility % 7~17
Density g/cmÂ³ 1.6~2.0
Normal temperature softness No cracking
Oil Resistivity Test:
Immersion IRM903 Oil keeping 5h (149â„ƒ)
Lateral Tensile Strength(MPa) â‰¥ 12.0
Weigh gain rate(%) â‰¤30
Immersion ASTM Fuel Oil B keeping 5h(21-30â„ƒ)
thickening rate (%) 0~20
Oil sealing properties under normal Temperature
Pressure: 16Mpa No leaking keeping 30 minutes
Nitrogen Leakage Rate ML/(hâ€¢mm)â‰¦300
Ny400 Asbestos Gasket Sheet For Oil-Resisting,Asbestos Gasket Sheet For Oil-Resisting,Oil-Resisting Gasket Sheet,Oil-Resistant Sealing Gasket Sheet
HEBEI HENGDA SEALING MATERIALS CO.,LTD. , https://www.hengdasealing.com