The first time the owner of the renovation, the concept of the purchase and installation of the switch socket panel is vague, too few to use, too much safety, too much to save money, so many brands do not know how to choose ... ... today to give you a Say how to choose and install switch socket panel in home improvement.
First, buy switch socket panel
1, see the appearance
The color of the panel is uniform, the surface is clean and free from dents, noise, stains, cracks, deformation, etc. Metal parts 2 have no burrs, cracks, corrosion marks, rust, etc. Try to choose a socket with a security door.
2, smell smell
A good switch socket does not smell bad. If it is used in summer, it will feel slightly hot to the touch, and it can even smell burnt odor. It means that the quality is not good, and if you continue to maintain a high temperature, it will cause an open flame. This is why most outlets cause fire homes. s reason.
3, open fire
The plastic body of the switch socket is burned with an open flame. If a large amount of black smoke is produced, it must be a product of poor quality. After a good switch socket is removed from the fire source, it will generally go out within 3 seconds.
4, 掂 component
A good product is a certain weight, there will be a sense of pressure. If the switch is an alloy or a thin copper sheet, it will be lighter and the quality will be worse.
5, verification body
Most of the well-known brands of switches and sockets promise an effective warranty, and can compare multiple brands for price comparison and then purchase. After the receipt of the goods, remember that "examination is correct" to prevent the purchase of fake fakes.
Second, switch socket panel installation
1, kitchen
Applicable sockets: 5-7 sockets (refrigerators, ovens, microwave ovens, range hoods, water purifiers, etc.); 2-3 with switch sockets (electric cookers, electric kettles and other commonly used small household appliances); 2-3 two Tertiary sockets (small appliances such as juicers and soya-bean milk makers that are occasionally used).
Installation height: The hood of the range hood is more than 1.8M above ground; the refrigerator socket is best placed on both sides of the refrigerator, 0.5-1.3M away from the ground.
2, bathroom
Applicable sockets: 1-2 with switch socket (water heaters, washing machines, etc.); 1-2 splash sockets (beside the toilet, next to the basin); 1-2 splash switches (bath heater, exhaust fan, etc.).
3, living room
Applicable sockets: 5-7 second, second and third sockets (next to TV, next to the sofa); 1 air conditioner socket, 1-2 network cable sockets, etc.
Installation height: It depends on the position and size of the TV cabinet and sofa.
4, bedroom
Applicable socket: 3-6 two or three sockets (beside the bed, next to the TV, next to the dressing table); 1 air conditioning socket; 2 dual control switches.
Installation height: According to the position and size of the bed and dressing table.
5, balcony
Applicable sockets: 1-2 three, two or three sockets (washing machines, dryers, etc.); 1-2 switches (ceiling lights, spotlights, etc.).
Installation height: 1.2-1.5M from the washing machine socket to the ground
The above is about the introduction of the switch socket panel and I hope to help you. If you still want to learn more about switch sockets, you can pay attention to the website decoration information channel.
Switch socket appliance
Nano Silicon Carbide Powder,Nano Sic Powder,Silicon Carbide Nanopowder
Silane Coupling Agent Co., Ltd. , http://www.nsgeosynthetics.com