1. The larger the amount of spring compression, the better the sealing effect. In actual fact, the spring compression is too large, can lead to rapid wear and tear of the friction pair, instantaneous burning; excessive compression of the spring lost the ability to adjust the dynamic ring end face, leading to seal failure. 2. Moment ring seal as tight as possible. In fact, the ring is too tight moving ring harmless. One is to exacerbate the wear and tear between the seal ring and the sleeve, premature leakage; the other is to increase the axial resistance of the moving ring, the resistance to movement, can not be adjusted in time when the working conditions change frequently; thirdly, Is to move the ring ring deformation, affecting the sealing effect. 3. Static ring seal as tight as possible. Static ring seal is basically static, the relatively tight seal will be better, but too tight is also harmful. First, the static ring seal caused by over-deformation, affecting the sealing effect; Second, static graphite material to the majority, generally more brittle, excessive stress can easily cause fragmentation; Third, the installation and removal difficulties, can easily damage the static ring. 4 impeller lock mother tighter and better. Mechanical seal leakage, the sleeve and shaft leakage (shaft leakage) is more common. Generally believed that the leakage between the shaft impeller lock is not locked, in fact, leading to leakage between the shaft more factors, such as the shaft pad failure, offset, impurities within the shaft, shaft and sleeve with a larger shape Bit error, contact surface damage, there is a gap between the various components on the shaft, the shaft thread is too long and so will lead to shaft leakage. Lock over lock only lead to premature failure of the shaft pad, on the contrary, lock the lock body, so that the shaft pad always maintain a certain degree of compression flexibility, in operation, the lock will automatically lock in time, the shaft is always in good Sealed state. New better than the old. Relatively speaking, the use of new mechanical seal effect is better than the old, but the new mechanical seal quality or material selection is not appropriate, with the larger size error will affect the sealing effect; In polymeric and permeability medium, the static ring without excessive Wear, or not replaced as well. Because the static ring in the static ring seat for a long time in a quiescent state, the polymer and impurities deposited as one, played a better seal. 6. Demolition is better than not demolished. In the event of a mechanical seal leak eager to repair, in fact, sometimes the seal is not damaged, just adjust the condition or adjust the seal to eliminate leakage. This will not only avoid waste but also to verify their own ability to judge the failure to accumulate maintenance experience to improve the quality of maintenance.
Recent Posts
- Made in China PPGI/HDG/Gi/SPCC Dx51 Zinc Cold Ro…
- Blue Elastic Rubber Shopping Cart Caster (G141-2…
- Copper Alloy Rod C15725 Bar in Stock, Excellent …
- New Design Metal Hooks for Clothes Hanger
- 2.4642 Hot Rolled Round Bar Super Alloy with Fac…
- Chinapals.2017 in Guangzhou
- Decoration: home owners must be present in the s…
- November 21, some companies caustic soda price i…
- Some companies' soda ash price information o…
- Shanghai paints more than 100 innovative product…
- EIA: U.S. crude oil imports fell 2.4% year-on-ye…
- Agricultural submersible pump precautions
- Seasonal copper-zinc-tin-sulfur solar battery re…
- Annual guide price of coal: The highest price of…
- Xiamen will closely monitor large network
- China's hardware tools to increase the value…
- Aluminum smelting energy-saving technology semin…
- Secret: Four Kinds of Mistakes in the Constructi…
- HDcctv - epoch-making video surveillance
- Communication with the designer, is your way cor…