In the decoration of the room, although the installation and maintenance of the wash basin is a small part of it, it is also a part that is often overlooked. Today, Xiaobian gives everyone the installation and maintenance methods of Amway wash basin.
What kinds of basins are generally divided?
Basin: can be divided into hanging, column, and desktop.
Desktop: It is divided into a trimming basin top basin and an undercounter basin. The upper basin of the trimming table is directly mounted on the table, and the washbasin on the washbasin can be used to modify the countertop. The undercounter is a countertop that is fitted with a solid countertop material and installed under the countertop.
Hanging type: Also known as wall-mounted type, this kind of basin should be built into a low wall during the decoration, and the water pipe is wrapped into the wall.
Column type: eye-catching visual focus, open space under the washbasin, easy to clean.
At present, there are more hanging facial washers on the market. The brackets are fixed on the wall, and the new faucet for washing the face adds a steel mesh, which can sense the pressure and make the water flow to the skin soft and comfortable. Higher-grade single-handle type hot and cold water faucet faucet, and some also install high temperature limit safety device to avoid high temperature damage to the human body; and infrared automatic opening and closing faucet to prevent secondary pollution after washing hands. In particular, some of the higher-grade drainage uses metal pull-type drainage components to replace the strong chain rubber plugs for drainers, which fully reflects the modernization of the modern family.
Common basin installation method
First, hanging pot installation
Hanging basins are generally mounted on the wall, which saves space. Let's take a look at the general installation method of the hanging pot.
1. By measuring, mark the installation height and center line on the finished wall. The recommended installation height is 82cm.
2. Place the basin along the center line to the installation position, adjust it to center horizontally, and anchor the mounting hole position on the wall.
3. Drill a suitable bolt hole in the anchor hole of the wall, install the suspension bolt on the wall, cover the decorative cap, install the bracket on the wall, install the faucet and drain assembly, and connect the water into the water. And the drain pipe, put a moldproof seal between the basin and the wall.
Second, the above counter basin installation
The installation of the above counter basin is relatively simple. Just open the hole at the predetermined position on the countertop according to the installation drawing, then place the basin in the hole and fill the gap with glass glue.
Third, the under counter basin installation
The installation of the under counter basin is more complicated than the installation of the above counter basin. Firstly, it is necessary to customize the mounting bracket according to the size of the under counter basin, and then install the undercounter basin in the predetermined position. After fixing the bracket, the countertop with the opened hole is placed on the table. On the lower basin. When installing, be careful that the position of the bracket is fixed accurately. In addition, the hole should be rounded.
Fourth, the column basin installation
The general method of installation of the pedestal is to first install the water purifier of the pedestal, then install the faucet and hose. Then place the pedestal porcelain column in the corresponding position, carefully put the pedestal basin on it, and notice that the lower water pipe is just inserted into the lower water pipe left by the original ground. Then connect the upper water pipe to the water inlet. Finally, glue the glass glue along the edge of the basin.
Maintenance of the basin
In the humid environment of the bathroom space, accidents are mostly children, because children bathe and wash; like to play in the water, due to environmental relations, if there are improper moves, such as: one foot stands on the edge of the bathtub wall, the other foot is placed on the face Dangerous behavior in the basin or hands on the left and right sides of the basin, jumping up and down, if accidentally slipping, it will cause an accident.
If the washbasin is hit by an external force that cannot be resisted by the moment, it will produce many sharp fragments and be injured by the debris. Usually, children should be taught to use the bathroom properly, and pay more attention to the situation of children washing in the bathroom. If they find inappropriate behavior, they should be corrected immediately to avoid accidents.
1. Change the bad habit of placing items on the basin.
2. For larger and heavier daily necessities on the top of the basin, please install a locker to facilitate the collection of daily necessities and avoid placing on the cosmetic board.
3. Usually clean: porcelain appearance soft bristles or sponges with neutral detergent cleaning, but should not be washed with hot water or directly into the hot water, so as not to crack the basin. To use the basin to hold water, first put cold water in the hot water to avoid burns.
4. Regular maintenance: The bottom of the water storage bay head can be removed, and the accumulated stains can be taken out to keep the drainage smooth.
5. Regularly check whether there is a crack in the basin in the home. Fill the basin with water and pour it into the colored pigment for one night. If there is a crack, you can see it clearly.
6. When cleaning the basin, try to use a sponge to clean the detergent. Remember not to use the melon cloth, or use a hard brush, acid or alkali chemical or solvent to wipe, because it will form small scratches on the surface of the basin, making it become Rough and easy to deposit dirt.
7. Porcelain and glass have very low thermal conductivity. If it is hot, it will rupture. Therefore, it should be noted that the temperature difference should not be too large, and it should avoid collision of excessive external force and cause cracking.
8. For the in-line wash basin, when cleaning, pay special attention to the dead corner of the joint below the countertop and the basin.
Source: China Ceramics Network
Pyrite as Fillers Used in Grinding Wheels/ Abrasive Tools
Ablation grinding wheel / abrasive( filling agent )
PYRITE__As fillers used in grinding wheels/ abrasive tools
Place of Origin: Henan Luoyang, China
Pyrite, Iron pyrites, pyrites lump, Ferro sulphur, Pyrites powder.
Product Description
Detailed introduction: is filling agent for ablating grinding wheel abrasive, which can effectively reduce the grinding wheel temperature during ablation, improve the heat resistance, and prolong the service life of the grinding wheel.
Formation of a protective layer
(1)The reaction absorbing oxygen occurs between 400 and 475 degrees, thereby reducing the oxidation of resin, reducing the oxidation burn of workpieces, and prolonging the working life of grinding wheels at high temperature.
4 FeS2 + 11 O2→2 Fe2O3 + 8 SO2
(2) 4 FeS + 7 O2→4 Fe2O3 + 4 SO2
400-475 degrees is a limit that the grinding wheel can easily reach. The above reaction creates an oxygen-free and hypoxic environment for the grinding wheel at the micro level, thereby improving the high-temperature performance of the grinding wheel.
Decomposition reaction occurs at 650-degree heat absorption, thereby reducing the working temperature of the grinding wheels.
FeS2→FeS + S
(3) It enters the melting state at about 1100 degrees, which becomes a good lubricant to protect the grinding wheel FeS(s)→FeS(l).
(4)Sulfur, sulfur dioxide and sulfur trioxide react with the workpiece surface to form FexSy:
Quality:
S: 48%min, FE: 42%min, SIO2: 3.0%max, PB: 0.1%max,
ZN: 0.1%max, AS: 0.1%max, . C: 0.3%max, CU: 0.2%max,
H20: 1.0%max, SIZE: 95%min
Granularity: (0-3)mm/(3-8)mm/(3-15)mm/(15-50)mm or other particle size.
Packing: 25KG/500KG/1000KG/BAG or 1000KG/BAG or other packaging.
Note: if there are special requirements, the product can be customized according to clients` requirements.
Iron Sulphide For Resin Grinding Wheel---LHT(SL)
Iron sulphide for resin grinding wheel Pyrite, Iron pyrites, pyrites lump, Ferro sulphur, Pyrites powder
LUOYANG PERFECT TRADING CO.LTD, , https://www.pyritefes.com