- Model NO.: 9001
- Shape: Equal
- Angle: 90 Degree
- Technics: Hot-pressed
- Size: 1/2"-2"
- Quality Control: 100% Inspection
- Sealing Ring Material: EPDM, HNBR, FKM
- Operating Temperature Range: 20°f-250°f
- Trademark: DBW
- Specification: 1/2" -2"
- HS Code: 74121000
- Connection: Press
- Head Code: Round
- Material: Copper
- Color: Copper
- Material Standard: ASTM B88
- Profile: V Profile Copper Press Fitting
- Operating Pressure: 200psi Cwp Max
- Approved Application: Drinking Water, Heating, Cooling, Compressed Air
- Transport Package: Polybags/Ctns/Pallets
- Origin: Taizhou. China
DBW copper press 90° street elbow
- For use with ASTM BÂ 88 tubingÂ
- Copper
-Press connectionÂ
- Components: EPDM sealing elementsÂ
-Available in sizes 1/2"Â to 2"
Model 9001
Features and benefits
The original copper press joining solutionÂ
Available in sizes 1/2"Â to 2", including elbows,couplings,tees,reducer, fitting reducer,caps,
Customizable with three sealing elements, EPDM, HNBR,FKM
leak detection feature identifies un-crimped connections
compatible with most common pressing tools and jaws in the market
All tubing must comply with the ASTM B88 standard
Â
Â
Operating parameters:
Operating pressure: 200PSI CWP max
Operating temperature range:-20°F-250°F
Â
Approved applicationsÂ
-Potable water
- Hydronic heating
-Chilled waterÂ
- Compressed airÂ
-Non-medical gases
-Low pressure steam
Â
Installation Instructions- Cut tube square using a tube cutter or fine tooth saw
- Deburr tube ID using a deburring toolÂ
- Deburr tube OD using half round fileÂ
- Check fittings bead to ensure seal is present. Do not use any type of oil lubricationÂ
- Mark tube to proper fitting insertion depth( see insertion depth chart below)
                           Fitting Insertion Depth Chart(1/2"-2") | ||||||
Tube size | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" |
Insertion Depth | 3/4" | 7/8" | 7/8" | 1" | 1-7/16" | 1-9/16" |
- Turn slightly while sliding press fitting onto tube. Slide all the way to insertion mark and make contact with stopÂ
- Place press tool at a right angle over fitting bead .Start the pressing process. Please see specific tool manufacturer for tool instructionÂ
FAQ
- What is the DBW press fittings system rated for regarding pressure and temperature?
- For what types of applications is the DBW system approved?
- For what types of media is the DBW systems designed?
- What products are included in DBW system offering?
- What does EPDM stand for?
Company and production line view:
Â
Â
A Reducing Elbow is a type of fitting which is used to join two pieces of pipe of different sizes. The reducing elbow is so called because it looks like a reducing piece and elbow combined into one.
When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.
Normally long radius elbows are used in piping as pressure loss is less as compared to short radius elbow. It required more space than short radius elbow.
An elbow is a Pipe Fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.
Types of reducing elbow:
The reducing elbows are available in various types like:
90° reducing elbow
45° reducing elbow
135° reducing elbow
180° reducing elbow etc
In long radius elbow, centreline radius is 1.5 times the nominal size of the pipe or you can say 1.5 times the diameter of the pipe.
Buttweld pipe fittings comprises of long radius elbow, Concentric Reducer, eccentric reducers and Tees.They are an important part of industrial piping system to change direction, branch off or to mechanically join equipment to the system. Buttweld fittings are sold in nominal pipe sizes with specified pipe schedule. BW fitting`s dimensions and tolerances are defined as per ASME standard B16.9.
Butt Weld fittings are also called Welded Pipe fittings. These welded fittings in carbon steel and stainless steel offer many advantages compared to threaded and socketweld fittings. The later are only available up to 4-inch nominal size whereas butt weld fittings are available in sizes from ½" to 102".
Reducing Elbow: Fittings that change direction in a piping system are called elbows. The directional change is given in degree such as 45 or 90. Long radius 90 degree elbow has the center line of elbow at 1.5 x NPS from eblow end. And the elbow ends in two different outdiameters
Reducing Elbow
Reducing Elbow, Elbow In Different OD, Special Elbow, Elbow Reducing, Reduced Elbow, Elbow Reduced,90 Reducing Elbow
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , https://www.bd-pipefitting.com