(top wind, bottom air installation technical requirements)
Energy-saving and environmentally-friendly air-conditioning bottom air outlet 1. Use 40*40*4 angle iron frame to connect with wall or window panel bolt;
2. All gaps are sealed with glass glue and cement sand;
3. The cross-sectional area of ​​the air-conditioning air supply duct shall not be less than 0.45 square meters;
4, the installation of the triangular bracket welding and installation must be firm;
5, the mounting bracket and the host must be horizontal;
6. All exterior wall duct parts should be waterproofed;
Energy-saving and environmentally-friendly air conditioner top air outlet 7. The bottom part of the main unit and the bracket contact part shall be padded with a shock pad;
8, zinc-iron tile shed installation must have sufficient strength to withstand the weight of environmentally friendly air conditioning host;
9. The size of the roof or roof opening should not exceed 20 mm of the duct size, otherwise it will not be waterproof;
10. There must be sufficient air intake and maintenance position in the installation of different locations;
11, the wall into the wall or into the window duct according to the location of use to determine the size of the cross-sectional area, but not less than 0.45 square meters;
12. The remote control receiver box connection communication line is introduced into the room from the air outlet pipe, and is installed at a position where it is easy to receive the remote control signal. A hole of 22 mm is required to be opened on the air outlet pipe and fixed at an appropriate position in the room.
Gasket Series,Metal Gasket,Steel Gasket,Metal Gasket Ring
Taizhou Wanluo Hardware Products Co., Ltd. , https://www.wlhardware.com