Cypress wood is a good furniture wood, cypress wood furniture is both environmentally friendly and practical. In fact, the maintenance of cypress wood furniture is very simple, pay attention to maintenance on weekdays, pay attention to some details when scrubbing. The specific steps can be seen in the following.
There are many kinds of furniture materials, including solid wood furniture, mahogany furniture, cedar furniture, etc., cedar wood is also a good furniture wood, the home has cedar furniture attention to weekday maintenance, can extend the life of cedar.
1. Before using the cedar furniture, check whether the overall structure is firm and loose. If the structure is loose, tighten the structural connecting fasteners; do not disassemble and modify the parts at will.
2. When cedar furniture is placed, it should be placed flat so that the dinette is often in an unstable state and the structure is loose. Cabinet furniture should not interfere with the use of indoor sockets, switches, lamps and other furniture, and leave the wall 5- 10CM should be kept ventilated, and should not be placed in a very humid place, so as to prevent the furniture from exploding and rot.
3. During use, please keep a certain temperature and humidity in the room. When using it in a dry environment, take humidification measures to avoid direct sunlight of cypress wood furniture and avoid high temperature and dry place.
4. When moving cedar furniture, two people must be lifted at the same time. Do not lift the frame on one side alone. When moving, lift it gently. Do not drag it hard. When moving across the area, do not carry it as a whole, and remove it after light disassembly.
5. Do not hit the surface of the cedar furniture with heavy objects, or cut things on the surface of the furniture to avoid damaging the surface.
6. Regularly use a clean, semi-wet soft cotton cloth to remove the dust from the wood texture. Before dusting, spray a cleaning agent on the soft cloth. Do not use a rough rag to avoid rubbing the surface of the cedar furniture.
7. Do not wash the cedar furniture with alkaline water or boiling water or place high concentrations of alcohol, banana water and other liquid on the surface of the cedar furniture to avoid damaging the surface of the cedar furniture. The restaurant furniture should be padded under the hot plate as much as possible to avoid Burning the paint film of the furniture.
8, too heavy items should not be placed directly on the table or table edge, resulting in furniture center of gravity is unstable or dumped, and even the legs are broken.
9, cedar furniture needs regular waxing, every 6-12 months, with a paste wax for the furniture a layer of wax. Prior to waxing, apply the milder non-alkaline soapy water to remove the old wax. If the table is placed on the table with a mat as much as possible, so that the food soup overflows, stains or damages the table. Try to avoid contact with corrosive liquids, alcohol, nail polish, lacquer remover, etc. on the furniture surface.
10, for the daily maintenance of scratches and bumps and remove water marks, the simpler method is to use cotton cloth or brush, paint the surface of the furniture with similar color, or use clean absorbent paper on the water, and then Use a heated iron to press it on top; it can also be applied with sand oil or toothpaste, and then dried and waxed. For removing white marks, you can use a cloth dash and a mixture of lemon juice or salad oil, dry and wax.
Cypress wood furniture not only pays attention to the purchase of better cedar furniture when purchasing, but also needs to pay attention to the above maintenance methods when using.
Our Roller Sleeve For Aluminium Extrusions have different raw material for your choose: PBO+ kevlar, 100% kevlar, 100% nomex, 100% polyester.All of the Felt Roller Cover could be customized as your demands.
Our main product: felt roller,felt belt,felt strip,set of blanket,synchronous belt,etc. The product is mainly used in large-tonnage extruder matching step-by-step or translating cooling bed in the ultra-high temperature area, we can provide you special resin hardening process to improve product wear resistance, increase service life.
Felt Roller Sleeve,High Temperature Felt Roller Tube,Felt Roller Cover,Felt Roller Tube,Felt Cover
HUATAO GROUP LTD , http://www.huataogroup.com