1. Daily maintenance content:
1. Clean the blender after use every day. Clean the mixing hook, the splitter and the mixing tank with a wet towel dampened with water. Do not have any water in the tank.
2. Weekly maintenance content:
1. It is necessary to clean the whole machine every week. Be careful not to flush the equipment with water to prevent water from entering the bearings of the electrical or transmission parts, resulting in equipment damage. Check that the equipment is placed smoothly.
3. Monthly maintenance content:
1. Use a grease gun to refill all the butter holes in the housing once a month or quarter.
2. Chain, the gear part is lubricated.
3. Check the tightness of the belt or chain to prevent the belt or chain from being damaged due to slippage.
4. Precautions for use:
1. Must be grounded
2. Keep the machine working in a steady state, not the whole machine shaking work
3. Do not over-mix, and the amount of water should be reduced when the moisture is below 55%.
4. If you need to use ice cubes, please use ice water to prevent damage to the stirring hook.
5. When taking the dough, do not use metal scrapers, shovel and the like to prevent scratching the mixing tank.
Concerned about surprises
Label: Maintenance and maintenance of the mixer
Previous: Precautions for correct installation of solenoid valve and solenoid valve Next: Structure principle and characteristics of mesh belt dryer
[Aluminum Alloy Housing Solar Lights]
Different from other solar lamps with plastic housing. Lightweight but strong. Sandblasted and anodized metal housing,anti-oxidation and corrosion resistance. It can be used for many years even in extreme weather or harsh outdoor environments and maintain its performance. The lampshade is made of engineering plastic PC material, which is heat-resistant, anti-ultraviolet, and anti-yellowing.
[High Efficient Solar Panel]
PET solar panel with a larger lighting area, it can absorb sunlight faster, so that it can be recharged faster. Charging for 8 hours, can be illuminated for more than 12 hours.
[High-END LED For Bright Outdoor Lighting]
LED beads is not the more the better, the key is the lifespan and brightness.
[Microwave Radar Induction & Dawn To Dusk Lighting]
Radar motion sensor is a detector that combines microwave receiving and transmitting equipment. The working principle is based on the Doppler effect. The microwave wavelength is very short, between 1mm and 1000mm, so it is easily reflected by objects.The sensing angle is greater than 180°, and the farthest sensing distance can reach 32 feet.Ultra-long runtime on always on mode,up to 12H for dusk to dawn lighting.
[Four Working Modes & Waterproof]
Four working modes meet all your requirements for lighting.Mode:Faint light to strong light ;No light to strong light;Always lighting;Emergency lighting.You can set the mode arbitrarily.Waterproof,suitable for any outdoor scene: Garage, aisle, porch, patio, garden, deck, camping, yard, farm, fence, wall, etc.
Outdoor Solar Wall Lights,Aluminum Solar Wall Lights,Solar Motion Lights Outdoor,ALUMINUM ALLOY HOUSING Solar Light
Shenzhen You&My Electronic Technology Co., Ltd , https://www.szyoumy.com