Floor tiles are ground decoration materials, also called floor tiles. Made of clay. A variety of specifications. Hard, wear-resistant, moisture-proof. Some are glazed and have a decorative effect. Mostly used for floors and floors of public buildings and civil buildings. In the renovation, floor tiles are one of the essential building materials. The construction process of the floor tiles is also stressful. Good craftsmanship can not only make your interior space smart, but also save you money and worry. The paving of tile and tile is the most test of the master craftsman's work. The good and bad of the paving of the tiles and tiles directly affect the appearance and safety of the decoration effect. Let me explain in detail about the construction technology of floor tiles for everyone!
Floor tile construction process (dry shop method)
1. Floor cleaning: Before the tiles are laid, the floor should be cleaned, especially the concrete and building slag after the condensation. If it is not clean, there will be a phenomenon such as edging and emptying after laying the tiles;
2, put the horizontal line, block: Before paving according to the size of the floor and floor tiles to pre-arranged floor tiles, pre-discharge principle is: the same room, horizontal longitudinal half brick can not exceed one row, and half the brick should stay In the future, where furniture is to be placed or where it is inconspicuous, horizontal lines should be set according to the typesetting plan and be divided into blocks;
3, ground watering: to be fully wet, can prevent emptying;
4, mortar mixing: to use two types of mortar, one is a 1:4 semi-dry mortar, used as a cushion, the other is a 1:3 mortar for bonding, sand washed with sand , Fine sand is mainly used for wall plastering, and Zhongsha is mainly used for ground leveling;
5, playing mortar base: generally used dry shop method, derived from the early marble pavement, although the cost is higher, but the paved tiles are flat and beautiful, durable, mortar to dry and wet moderate, the standard is "hands into a group, "Floating and flowering", it is best to apply a cement slurry with a water-cement ratio of 1:0.4--0.5 before spreading the mortar.
6, trial shop, grass-roots leveling, compaction: whether empty floor tiles, this step is very important, must be tampered, and this step workers should check the floor tiles and adjacent floor tiles have any errors;
7, the bottom of the brick sizing: in the back of the floor tiles to wipe a layer of 1:3 mortar, as an adhesive layer, the thickness of not less than 1CM, smear must be uniform;
8. Paving: Use a rubber mallet to evenly tap, adjust the level of the horizontal line and other floor tiles and the size of the gap. If there is a condition, use a level ruler to check whether the tile is horizontal, and use a rubber mallet to beat until it is completely level.
9, pull joints: use a scraper to draw a line from the middle of the brick seam, to ensure that there must be a certain, even gap between the brick and brick, to prevent thermal expansion and contraction of the brick damage, with a spatula on the two bricks longitudinal pull back and forth, Check whether the two bricks are flush;
10. Surface cleaning: After the pavement is completed, immediately clean the dust and mortar on the surface of the floor tiles to prevent the mortar from adhering on the surface of the floor tiles.
11, staggering: Tiles for jointing treatment in general after the dry tile is appropriate, if the tile is not completely dry on the hook, the problems are: First, caused by the level of uneven tiles, and the second is to cause the tiles The looseness, so that in the later use when the tile is easy to fall off; In general, the time of the jointing in the tile for 24 hours to make a good comparison. Stitching need to pay attention to what the problem? When performing the jointing of tiles, first of all need to clean up the dust and impurities in the tiles, then squeeze the grout into the brick seams, pay attention to the time of filling, be sure to squeeze full fill, after the jointing, timely Clean up the seaming material on the brick surface!
12. Finished product protection: After the floor tile is finished, it must be protected by the finished product, mainly to prevent pollution and damage to the floor tiles caused by the follow-up work. The protective layer can use the cardboard or color strip cloth of the floor box.
Editor's summary: The above is a detailed explanation of the paving brick construction process to the brick paving: the construction is not easy to cause the loss of the relevant presentations, hoping to help meet the needs of the friends! For more information, please continue to follow our website, follow-up will show more exciting content. You can also purchase more of your favorite products on Qijia Mall!
Tile Paving Decoration Construction Knowledge Construction Installation Spring Decoration Knowledge Decoration Material Knowledge
Derrick DP 600 PMD Shaker Screen
Replacement PMD Screens Derrick DP 600 Series Shakers
SJ-PMD DP 600 shaker screen with dimension of 626 × 710 mm which is smaller than other screen panels, it is the replacement screen for Derrick Dual pool 600 series shale shakers. There are 6 or 8 panels needed for each DP 600 shaker. Innovative actuated screen compression system drives the center of the screen panel downward and firmly sealing the screen panel to the screen frame. The mud recovery is greatly improved.
Technical Parameter
- Material: stainless steel 304/316/316 L.
- Body Material: stainless steel plate.
- Construction Type: PMD (pyramid).
- API RP 13C Designation: API 20 – API 325.
- Series: DX, DF, HP optional.
- Color: green.
- Package: 2 pcs per carton, packed in wooden case.
Adaptable Shale Shaker Model
SJ-Derrick Dp600 Pmd Shaker Screen are used to as the substitute screen for:
- Derrick DP (Dual Pool) 626 shaker.
- Derrick DP (Dual Pool) 616 shaker.
- Derrick DP (Dual Pool) 628 shaker.
- Derrick DP (Dual Pool) 618 shaker.
- Derrick DP (Dual Pool) 626 VE (Vapor Extraction).
- Derrick DP (Dual Pool) 616 VE (Vapor Extraction).
- Derrick DP (Dual Pool) 628 VE (Vapor Extraction).
- Derrick DP (Dual Pool) 618 VE (Vapor Extraction).
Competitive Advantage
- Light-weight screen panels for fast, user-friendly screen changes.
- Easy screen inspection, removal, and installation.
- Maximize solids removal capabilities.
- Increase shaker capacity and reduce mud loss.
- API RP 13C (ISO 13501) compliant.
- Adequate inventory in the shortest time to meet customers' demand.
- Warranty Period: 1 year.
- Working Life: 400–450 hours.
Remarks:
Derrick, DP 600, PMD, DX, DF, HP are marks of Derrick Corporation.
ShengJia only produces the replacement screens but not original from Derrick
Derrick DP600 PMD Shaker Screen
Derrick Dp600 Pmd Shaker Screen,Derrick Flc600 Shaker Screen,Derrick Flc600 Shale Shaker Screen,Derrick Flc600 Pyramid Shaker Screen
Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com