Safety production ban
It is strictly forbidden to engage in electrical, lifting and electric welding operations without operating licenses. Offenders are dismissed and the labor contract is terminated.
It is strictly forbidden to drive a motor vehicle without a license or after drinking, and the offender shall be dismissed and the labor contract terminated. Â
It is strictly forbidden to arbitrarily decide to drill a high-hydrogen sulfide-containing oil and gas layer or to conduct a gas test without approval. The offender shall expel the directly responsible person and terminate the labor contract.
It is strictly forbidden to use fire, enter restricted space, or temporarily use electricity in violation of operating procedures. Offenders shall be given administrative sanctions and demobilized for training; if consequences are caused, they shall be expelled and the labor contract terminated.
It is strictly forbidden to be responsible for radioactive sources, fire-fighting equipment, and well-controlled guardians who leave the post. Offenders are given administrative sanctions and are out of service. If the consequences are caused, they shall be expelled and the labor contract terminated.
It is strictly forbidden for dangerous chemical loading and unloading personnel to leave the post, and the offenders shall be given administrative sanctions and demobilized for training; if the consequences are caused, they shall be expelled and the labor contract terminated.
It is strictly forbidden to drill, record, and downhole operations in violation of the well-controlled safety operation rules. Offenders shall be given administrative sanctions and demobilized for training; if the consequences are caused, the labor contract shall be expelled and terminated.
Basic safety requirements - safety production responsibility system
Proficiency in operational skills, strict adherence to operating procedures, and a good record.
On-time inspections were carried out on time, and abnormal conditions were reported and reported in time to eliminate the accident in the bud.
In the event of an accident, it should be handled correctly according to the emergency plan.
Carefully maintain the equipment, keep the working environment clean and tidy, and do a good job of civilized production.
Dress up as required, and use all kinds of protective equipment correctly.
Actively participate in various security activities, post technical training and emergency plan drills.
Have the right to refuse illegal command.
Do a good job in the supervision of direct operations and implement various preventive measures.
Direct work safety - safe operation with fire
Fire working range
Use fire work to carry out one place (one place to use fire), one card (fire permit), and one person (fire guardian).
The effective time of the fire operation permit: the oil field and the sales enterprise are one operation cycle, but the maximum is no more than 5 days; the refining and chemical enterprise's first-level and special-level effective time is no more than 8 hours, the second-level "no more than 3 days, and the third-level no more than 5" Day. If you interrupt the operation for more than 1 hour, you must reconfirm.
All equipment and pipelines, such as towers, tanks, vessels, etc., which require fire, shall be subjected to internal and environmental gas analysis and analysis.
Equipment, containers and piping are qualified for use in fire.
Remove all combustibles from the site before using the fire and prepare fire equipment.
Use fire to carry out "three no fire".
When the fireman does not perform the "three no fires" and does not listen to dissuasion, the fire guardian has the right to take back the "fire permit."
Direct work safety - safe access to confined spaces
“Confined space†refers to closed and semi-enclosed facilities and places with limited import and export in the production area, poor ventilation, and toxic and harmful risks.
Closing the valve does not replace the addition of a blind plate.
Develop emergency plans, equipped with rescue equipment and fire-fighting equipment, and remove obstacles from import and export.
Do not charge oxygen to confined spaces.
The confined space "three does not enter."
Safety voltage and safety lights should be used when entering restricted spaces. Workers should wear anti-static clothing and use explosion-proof tools.
When entering a device with a rotating part such as a stirrer, the power should be cut off, the warning should be listed, and the guardian should be supervised.
Do not use hoists, cranes, etc. to transport workers when entering restricted spaces.
To save others, you must protect yourself first.
Remember to carry the tools you need.
It is strictly forbidden to remove the protective mask in a toxic and suffocating environment. Â
Direct work safety - temporary electricity safety
Temporary power should be used for operating permits.
Temporary use of electricity in the explosion-proof area shall be accompanied by a fire operation permit.
Temporary power facilities should be equipped with leakage protectors, and mobile tools and hand tools should be protected by one machine, one gate, and one hand.
The temporary power distribution panels and boxes on the site shall be protected against rain.
Direct work safety - high work safety
The seat belt should be hung on a solid member and the high hanging (system) is low.
It is forbidden to parabolic at high altitude and the necessary tools are placed in the tool bag.
Workers must not rest at high altitudes.
Blocking measures to prevent spark splash should be taken at high fires.
People with high blood pressure, heart disease, anemia, epilepsy, mental illness and other diseases can not work in high places.
Lifting operations shall not be carried out when there is a lifting, hook or hanging object, or a person on the hanging object or a floating object.
It is strictly forbidden to use lifting equipment and pipes to make lifting points. (put to lifting work)
No person (warning line) is allowed within the lifting radius.
The weight of the hanging object is unknown and cannot be lifted.
Hoisting machinery and its booms, spreaders, auxiliary equipment, wire ropes, cable ropes and hanging objects shall not be close to high and low voltage transmission lines.
Source: EHS House
China Chemical Safety Association
Editor: Chen Guofang
Stainless Steel Sanitary ASTM A270 Stainless Steel Tubes is the main tubing line for a piping system. Generally, ASTM A270 Stainless Steel Tubes are made in stainless steel 304 and 316l, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both Sanitary Seamless Tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified ASTM A270 Stainless Steel Tubes comply to your your condition and FDA,GMP requirement.
ASTM A270 Stainless Steel Tubes - Sanitary Tubing
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical
Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.
ASTM A270 Sanitary Tubes,A270 Stainless Steel Pipes,SS304 Sanitary Tubes
Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com