Do you know the daily maintenance of the mesh belt conveyor? Let's talk about it.
Do you know the daily maintenance of the mesh belt conveyor? Let's talk about it.
Net belt conveyor daily maintenance
1. The mesh belt conveyor should have fixed personnel in the work process. The caretaker must have general technical knowledge and familiarity with the performance of the conveyor.
2. The enterprise shall formulate the “equipment maintenance, overhaul and safe operation procedures†for the conveyor to be observed by the caretaker. The caretaker must have a handover system.
3. The feeding to the belt conveyor should be uniform, and the feeding funnel should not be filled too much to overflow the material.
4. During the operation of the conveyor, non-care personnel should not be near the machine; no personnel should touch any rotating parts. When a fault occurs, it must be stopped immediately to eliminate the fault. If there are defects that are not easy to eliminate immediately but have no significant impact on the work, they should be recorded and eliminated when they are overhauled.
5. When looking at the conveyor, always observe the operation of each component, check the connecting bolts everywhere, and find that the looseness is tightened in time. However, it is absolutely forbidden to clean and repair the running parts of the conveyor when the conveyor is running.
6. The screw tensioning device assembled at the tail should be adjusted properly to keep the conveyor belt with normal working tension. The caretaker should always observe the working condition of the conveyor belt. Where the local damage occurs, it should be decided whether to replace it immediately or replace it with new ones depending on the degree of damage (whether it has an impact on production). The removed conveyor belt should be used for other purposes depending on the degree of wear.
7. When looking at the belt conveyor, it is necessary to observe the working conditions, cleaning, lubrication, and inspection and adjustment of the spiral tensioning device and other sporadic work.
8. The belt conveyor should be started under no load under normal conditions and parked after the material is unloaded.
9. In addition to maintaining normal lubrication and replacing individual damaged parts during use, the conveyor must be fully inspected once every 6 months. During the inspection, it is necessary to eliminate the defects in use and description, replace the damaged parts and replace the lubricating oil.
10. The enterprise can make an overhaul cycle according to the working conditions of the conveyor.
The above is only a personal opinion and is for reference only. Haoyu Conveying Machinery Factory welcomes you to visit us.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Circulating Inline Water Pump,Centrifugal Water Pump,Vertical Water Pump,Sea Water Centrifugal Pump
Hengshui Yuanhan Trading Co.,Ltd , https://www.yuanhanpump.com