In St. Louis, Arizona, USA, it has recently decided to build a power generation tower developed by Solar Wind Energy Tower that uses a hybrid solar + wind energy technology method to produce clean energy using only sunlight, water, and wind gradients. It can be used 24 hours a day, 365 days a year. Generate electricity to make up for the current shortage of solar and wind power plants.
The tower is located in a hot and dry area. Its structure is a hollow cylinder that is clouded and opens at the top to allow hot dry hot air to enter. There is a water spray system next to it, which can lift the water pumped up to form a spray of water onto the open area at the top of the tower. When the water evaporates after it encounters dry air, the air cools rapidly and the specific gravity increases, creating a vertical sinking flow that can reach speeds of about 50 mph.
When a stream of air is poured into a number of wind tunnels around the tower base, a series of wind turbine generators are built to generate electricity. Each wind tunnel has a dedicated generator room with multiple large generator sets and is powered by a dedicated drive system. Since moisture evaporation does not occur only during sunny days, the tower can produce clean electricity 24 hours a day, 365 days a year.
One of the advantages of this new type of solar wind power plant is that the self-contained wind that it uses is generated by the heat of the sun, so it is suitable to be built in areas where the wind is small or the wind is uneven. In areas with abundant wind resources, vertical guide vanes can be built on the surface of the absorption tower to help direct capture of strong winds and deliver large amounts of electricity to the turbines. Such double measures have made up for the insufficiency of power generation for solar and wind power plants, making full use of renewable energy and improving the efficiency of power generation.
Such power towers are said to have an hourly capacity of 1,250 megawatt-hours. If the capacity index is 0.6, the potential output is 750 megawatt-hours per hour, of which about 18.5% will be used for its own operation (including lifting water. To the top of the tower), the final electricity capacity that can be sold to the grid is approximately 600 MWh. Due to the low power generation capacity in the winter, the average annual output of electricity is slightly lower.
According to a report by the Physicist Organization Network on May 5, this solar wind tower is now the first approved project in the United States to be established on a 600-acre site near St. Louis, Mexico. By 2018, it will be ready for operation and become a convenient local public facility and substation. The water needed to operate the tower will be provided by the city and signed a commercial contract for at least 50 years.
Copper Cable Terminals Crimping lugs Heavy Duty are made of electrolytic copper. Cable lugs come in bare or tin plated finish. Copper Cable Terminals Crimping lugs Copper Cable Terminals Crimping lugs Heavy Duty tubes are pressed, forged and machined to achieve the desired size and shape. Due to the uprising demands of our patrons, we are instrumental in offering a quality range of Copper Terminal Lugs. These are designed in tune with the set industry standards, so that the final product stands high on quality.
Product Details:
Long lasting metal
Easy to install
Sturdy construction
Rust free
Minimal maintenance
Better conductivity
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.
Copper Terminal Lug,Dt Copper Cable Lug,Copper Connecting Terminal Lug,Copper Compression Lugs
Shandong Vantage International Trade Co., Ltd. , https://www.sdvantage.com