The toilet is an essential sanitary ware for every household. However, many people do not understand its location, orientation, and distance during decoration, so that after the purchase, it cannot be installed. So, how to measure the toilet pit distance? What if the toilet pit distance is too long? Next, let's take a look at how to measure the toilet pit distance !
1. What is the toilet pit distance
The pit distance of the toilet generally refers to the vertical distance of the sewage drain pipe of the toilet from the wall surface. When you measure this pit distance, remember to include the thickness of the tiles. The thickness of the wall tiles is generally 6-8mm, of course, the thickness of the putty layer is added, which is about 10-20mm.
Second, the common toilet outlet method
Nowadays, the popular toilet outlet methods on the market are: horizontal row and floor row. There are differences in the requirements of pit distance between these two water discharge methods. In the horizontal row, it is generally suitable for installing a flush toilet, and the pit distance is generally about 180mm; in the ground row, the general flush and siphon toilets can be matched, and the pit distance is 200mm, 400mm, 580mm, etc.
3. How to measure the pit distance of the toilet
According to the normal construction process, it is necessary to lay the tiles first, wait for the tiles to be laid, and then measure the pit distance of the toilet. This is also the most reliable measurement method. So don't pre-order the toilet before installing bathroom tiles. Under normal circumstances, the toilet pit distance of commercial housing district is 300 or 400 mm. If you are always afraid that the measurement is wrong, you can ask the neighbors who have been renovated in the same apartment. Your pit distance is basically the same. If the result you asked is the same as your own measurement, then you can rest assured to buy a toilet.
4. What to do if the toilet pit distance is special
The pit distance is not fixed, and many owners have encountered situations where the pit distance is too large and too small. If this is the case, we can do this:
1. If the pit distance is less than the minimum standard pit distance of the toilet, you can remove a part of the wall behind the toilet to make the toilet pit distance meet the installation standard. One thing to note is that the strength of the back wall must be a certainty, and it does not have to be completely through.
2. If the pit distance is greater than the highest standard pit distance of the toilet, we can build a small wall behind the toilet tank. Not only can the pit distance meet the installation standard, but also can be used as a small storage platform.
Summary of the article: The above is all how to measure the toilet pit distance and how to do if the toilet pit distance is too long. From the content of the article, it is not difficult to see that the pit distance is still really too large, and never too small. If you encounter a load-bearing wall, it will be very difficult!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Led Cabinet Light,Under Cabinet Led Light,Usb Charge Led Cabinet Light,Round Led Cabinet Light
Shenzhen You&My Electronic Technology Co., Ltd , https://www.nbyoumysolarlight.com