Home>Bearing knowledge>Introduction to self-lubricating rod end joint bearings |
Introduction to self-lubricating rod end joint bearings
Source: China Bearing Network Time: 2013-08-11
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
.2) SA...C type is the assembly of CE...C type bearing and rod end. The rod end is externally threaded; the data is carbon structural steel. It can accept the load with the same direction. It can accept the radial load together. A direction less than or equal to 0. 2 times the axial load of the radial load.
.3) SI...CS-2Z is ​​the assembly of GE...CS-2Z bearing and rod end. The rod end is internally threaded; the data is carbon structural steel. It can accept either direction less than or in combination with radial load. Axial load equal to 0. 2 times radial load.
.4) SA...CS-2Z is ​​the assembly of GE...CS-2Z bearing and rod end. The rod end is externally threaded; the data is carbon structural steel. It can accept the direction constant load. Under the radial load Together, it can accept axial loads in either direction less than or equal to 0. 2 times radial load.
.5) SIB...C rod end with internal thread; data is carbon structural steel; sliding outer surface is sintered bronze composite material, inner ring is hardened bearing steel; sliding outer surface is plated with hard chrome. can accept radial direction unchanged Load.
.6) SAB...C rod end with external thread; data is carbon structural steel; sliding outer surface is sintered bronze composite material, inner ring is hardened bearing steel; sliding outer surface is plated with hard chrome. can accept radial direction unchanged Load.
.7) SIB...F rod end with internal thread; data is carbon structural steel; sliding surface is made of glass fiber reinforced plastic with PTFE as additive, inner ring is hardened bearing steel; sliding surface is hard chrome plated Can accept radial loads with constant direction.
.8) SAB...F rod end with external thread; data is carbon structural steel; sliding surface is made of glass fiber reinforced plastic with PTFE as additive, inner ring is hardened bearing steel sliding surface with hard chrome plating. Can accept radial load with constant direction.
.9) SQ...L type is made of special self-lubricating alloy material; it can accept radial load and small axial load in either direction.
Recommend to friends comments close window
Bearing related knowledge |
High-speed bearing equipment cooperation and adjustment of ball mill bearing sliding change tumbling energy saving efficiency high skill analysis: shaft, shell and bearing cooperation sliding bearing structure design most worthy of attention matters in detail who created the bearing |
This article links to http://
Please indicate the bearing network http://
Previous:Analysis of the bearing grinding marks of fine grinding in the next section: Equipment cooperation and adjustment analysis of high-speed bearings
The most significant advantage of Pull Out Kitchen Faucets is that it saves space. It has much a shorter spout and works best with small to medium-sized sinks where Pull Down Kitchen Faucets aren`t as beneficial. It`s also a more flexible design, so it shouldn`t cause too much splashing. Using longer hoses is convenient again, as it can allow filling up pots further from the sink area.
Pull Out Kitchen Faucets,Pull-Out Hot And Cold Kitchen Faucet,Brass Pull Out Kitchen Faucet,Black Pull-Out Kitchen Mixer
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jenorsanitary.com