First, available desiccant:
1. Quicklime desiccant. The main component is calcium oxide. Its water absorption capacity is achieved by chemical reaction. Therefore, water absorption is irreversible. Regardless of the humidity of the external environment, it can maintain a moisture absorption capacity of more than 35% of its own weight, which is more suitable for low Temperature preservation, excellent dry moisture absorption, and low price.
2. Silica gel desiccant. This desiccant is a different type of silica gel packaged in a moisture-permeable pouch. The main raw material silica gel is a high-porosity structure of hydrous silica, which is non-toxic, tasteless, odorless, chemically stable and strong. The moisture absorption performance is relatively expensive.
Second, the bulb drying method: put one or several high-power incandescent bulbs (such as 100W) into the motor cavity for drying. Note: the bulb can not be too close to the coil to prevent burning the coil. Can be on the motor casing Cover with canvas and other things for insulation.
Third, the circulating hot air drying method: using a heat insulating material to make a drying room (such as refractory brick masonry), there is an air outlet on the top, and an air inlet on the side. The air inlet and the heating chamber are connected to each other, and the heating chamber is insulated to set 3kW. The left and right 220V electric furnace wire (heating chamber can also be heated by other methods). The heating chamber can be made of iron sheet, and the hot air in the heating chamber is blown into the drying chamber by a blower to dry the motor winding. The hot air temperature in the drying chamber is controlled at about 100 °C.
Are you looking for a high-strength, super-abrasive, longer-lasting Polyurea Floor Coating?
The UMS-AUPT Polyaspartic Floor Coating system is a very good choice, and its construction method is almost the same as epoxy resin and polyurethane coating. But it has more amazing performance. Its wear and impact resistance is like a liquid diamond, and its flexibility and UV resistance are amazing. The ability to resist a variety of chemicals is unmatched by other floor coatings. The paint itself has no solvent, no vocal discharge during construction, and is environmentally friendly.
The heavy wear, wear, oil and chemical properties of many manufacturing facilities make industrial strength floors require special coating protection. The industrial flooring of your manufacturing plant must be strong, chemically resistant and easy to clean - our specialty Industrial Floor Coating system meet all of these requirements. Regardless of the type of manufacturing your facility, we can do this with hard concrete floor coatings and finishes.
Long-lasting quality and convenience, Polyaspartic Garage Floor Coating system provide consistent garage floor durability and performance. That's why we have developed garage floor coating polyurea solutions that specialize in the strict requirements of manufacturing facilities, warehouses, assembly lines, machine shops, factories and other heavy production sites.
UMS-AUPT polyurea garage floor coating system is widely used in gymnasiums, stadiums, stadiums and other sports floor, pavilion floor, garage floor, chemical room floor, warehouse floor, distribution center floor, electronics, food, beverage, fire, pharmaceutical, Floors in hospitals, airports, kindergartens, etc.
Polyurea Flooring
Polyurea Garage Floor Coating,Garage Floor Coating Polyurea,Polyurea Floor Coating,Polyaspartic Floor Coating,Industrial Floor Coating,Polyaspartic Garage Floor Coating
UMS New Materials Industry Co.,LTD , http://www.ums-factory.com