>>>10 Principles for Storage in Bathrooms
The current renovation of the bathroom and bathroom, how to reflect its comfort and safety, has become a focus of decoration. When we interviewed people in the home improvement industry, we learned that there are many details involved in the decoration of a bathroom. If not handled properly, it will not only directly affect the quality of future home life, but will also affect the mood. Bathroom decoration should pay attention to the following points:
First, the ceiling: Because the water vapor in the bathroom is heavy, so we must choose those materials with waterproof, anti-corrosion, rust-proof characteristics.
Second, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tiles are laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), slope toward the floor drain;
After the tiles are laid on the ground, the water-closing experiment must be done. The time must be at least 24 hours. When paving the floor tiles, attention must be paid to aligning and aligning the tiles to ensure the overall sense of the entire bathroom so as not to create a cluttered visual impression.
Third, the wall: wall tiles should also be good moistureproof and waterproof, and to ensure the formation of tiling flat, and to be seamed and aligned with the floor tiles, in order to ensure the integrity of the wall and the ground; if you encounter water supply pipeline exit The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.
Fourth, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.
V. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the location Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.
Sixth, waterway transformation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as the washing machine model, the location of the water will be different.
VII, sanitary ware installation: It is best to remember the hole distance before the decoration, according to the size of the bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet installation should be used to sit The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.
8. Ventilation and ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must have a retrograde gate to prevent the backflow of dirty air.
9. Greening: Adding anger. The bathroom should not be a corner that is forgotten by the green. You can choose some shade-tolerant and hi-potted pots to be placed in the bathroom during the renovation.
Bathroom Window Switch Household Decoration Socket Glass Tile Glass Sliding Door Glass Doors Bathroom Sliding Doors Bathroom Tiles Bathroom Doors Bathroom Wall Tiles Bathroom Dimensions Bathroom Tiles Bathroom Sinks Bathroom Toilets Waterproof Toilet Doors Size Tiles Glue
High Speed self-Recovery Rapid doors are the technological evolution of old, PVC high speed doors or heavy folding doors, now obsolete and not suited to today's industrial needs.
High-quality panels, the resistive safety edge fitted to the bottom edge of the door, photocells and barriers make this product both safe and durable, being totally self-repairing, thanks to its special [Anti Crash System".
This door designed with a perimeter structure in galvanized or stainless steel, which is ideal for sliding panels. The door panel rides effortlessly within a track, thanks to the special profile and hinge designed by us, requiring low maintenance. The panel is rolled up on a roller placed within the upper crossbeam.
The door can be equipped with a counterweight or ups batteries, to fully open the door in case of power failure, and can also be equipped with large transparent sections to create a brighter and safer working environment.
Self-Repairing Door Curtain made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
Self-Recovery Rapid Door,Self Recovery PVC Rapid Door,Self Recovery Rapid Rolling Door,Self Healing Roll Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffreezerdoor.com