Partition decoration is a very important partition material. Here we come to understand what is the common type of partition board, partition board and price of partition board , let us use it better in the partition decoration.
What is a partition board
The partition board is not difficult to see from the name and material is a wall material with a barrier function. Strictly speaking, the partition wall board is a wall-preformed board material used for interior partition walls of buildings and the like. The partition board has a very good wall effect. The special function of the soundproof and fire prevention and various wall surfaces can achieve the same effect using different materials of the partition board.
Partition boards include glass fiber reinforced cement slats, glass fiber reinforced gypsum hollow slats, steel wire (steel wire mesh) reinforced cement slats, light concrete slats, composite sandwich light slats, and more. The full name is a lightweight partition wall slat, serving as the main material for non-load-bearing internal partitions in general industrial buildings, residential buildings, and public building projects.
The use of lightweight partition wall panels as non-load-bearing internal partitions for general industrial buildings, residential buildings and public buildings is a lightweight partition wall project.
At present, the third-generation environmental protection and energy-saving partition wall boards vigorously promoted by the country have the advantages of soundproofing, moisture proofing, anti-seismic sound insulation, fire insulation, small footprint, good strength, and convenient construction.
Partition type
Usually divided into GRC lightweight partition board (glass fiber reinforced cement), GM board (silicon magnesium board), ceramic board, gypsum board.
1, light cement foam sandwich board
Foamed cement composite board is also called medium body board. This product has the obvious advantages of environmental protection, energy saving, pollution-free, light weight, seismic resistance, fire prevention, heat preservation, sound insulation, and quick construction. Since it was put on the market, it has been favored by building material experts. Many construction companies are eagerly concerned.
The main components are: roof panels, grid panels, floor panels, wall panels, special-shaped panels. The outer ring is made of C-shaped steel skeleton, and the inner ribs are added. The steel wire mesh is laid inside the overall plate layer. The core material is filled with lightweight foam concrete.
2. Polystyrene particle sandwich panel
The lightweight composite energy-saving wall material is a kind of non-load-bearing lightweight composite board formed by thin fiber cement or calcium silicate board as a panel and filled with a light core material in the middle. The product is solid, lightweight, thin, high strength, impact resistance, strong hanging, thermal insulation, sound insulation, fireproof, waterproof, easy to cut, can be slotted, no need to batch file, dry operation, environmental protection and other walls The incomparable comprehensive advantages of physical materials can achieve the goal of energy conservation. This will drive the construction industry from backward wet construction to advanced dry construction, thus realizing the industrialization of residential parts production, the modernization of technical equipment, and the intensive production scale.
3, fly ash lightweight wall panels
4ã€Silicone Magnesium Aerated Concrete Hollow Light Wallboard-GM Board
GM plate is formed by chemical reaction of a variety of inorganic materials. It has been developed for nearly 20 years since the end of the last century. It has been continuously improved, improved and improved in production, installation and use. It is divided according to the improvement process and quality of the plate. For the generation board, the second generation board, the third generation board, the fourth generation board.
5, clay acoustic insulation board
The natural fired clay, wollastonite, diatomaceous earth, inorganic adhesives, reinforcing fibers, etc. are used to produce high-quality fire-retardant decorative materials that are heated and gasified. The product solves the decoration problems of interior and exterior wall decoration materials well, with green environmental protection, energy saving, no radiation, no pollution, fire prevention, insulation, sound insulation, high strength, no damp, light weight, cold and hot dry and wet expansion rate , no deformation and other advantages.
Partition board price
Partition board can be said to be one of the main materials in construction, so the price is naturally similar to many major materials. The current market price of the partition wall is in the range of tens of dollars to several hundred dollars and one square. Due to the different regions and different costs of materials, the price differences between the various places are relatively large. Therefore, when choosing, the relevant building materials market can be consulted.
What is the above about the partition board? The type of partition board and the price of the partition board are introduced here briefly and I hope to help you. For more information, please visit this website. Stay tuned.
Partition partition design partition decoration
KSNFJ is a factory ready-mix powder that has undergone strict quality control to facilitate on-site construction. It contains a selection of metallic mineral aggregate materials and specialty Portland cement, as well as special additives to promote construction performance. Specially made materials ensure gradation and free from impurities, which aggregate shows good conductivity and wear resistance.
KSNFJ for the need to improve the wear resistance, resistance of the concrete surface, in particular, sparks, antistatic areas. For example: flammable warehouse, chemical plants, petrochemical plants, dangerous products workshop, gas stations, liquefied gas stations, hangars, textiles, electronics, paper, printing and other long-term electrostatic regions.
Product Advantages:
1. To make the ground extremely hard, wear and impact resistance
2. With the concrete surface to form a monolithic bond
3. Fireworks conductive static
4. Anti-all kinds of oil, grease erosion
5. Easy to construct
Wear resistance: The KSNFJ-treated concrete floor exhibits at least three times more wear resistance than the untreated concrete floor.
Electrical properties: KSNFJ shows good electrical conductivity to dissipate static electricity. KSNFJ can be grounded in the traditional way with specific requirements. Due to the ductility of metallic materials in the ground so that the impact of metal collision with a high degree of fireworks.
Surface resistance: 1.0×105 ~1.0×108Ω
Compressive strength: Using the same amount of water as the actual construction, KSNFJ test block 28 days standard compressive strength of 90Mpa.
Storage: KSNFJ and Curing Agent intact packaging stored at room temperature and dry environment, the storage period of six months.
Health and Safety: The cement powder contained in KSNFJ will adversely affect the skin during normal use. When the product is mixed with dampness, the released alkali will damage the skin, irritate the eyes and respiratory system, avoid inhalation of its powder, and avoid skin and eye contact. Wear suitable gloves and eye protection. Once touched the skin, wash with water. Once you reach your eyes, immediately wash with plenty of water and seek medical treatment.
≤3.1
Project |
Performance |
Compressive strength (3 days)
|
≥40Mpa |
Compressive strength (28 days) |
≥90Mpa |
Bending strength (28 days) |
≥13.5Mpa |
Non burning, do not explode, not flammable |
|
Fire class |
A1 level |
Wear resistance(750g/500r) |
≤0.03g/ãŽ2 |
Hardness (Mohs) |
≥7 |
Surface strength (indentation diameter mm) |
|
Oil resistance oil seepage |
<0.3mm |
High temperature |
+200℃ |
Freezing type |
-40 ℃ (Freeze-thaw 25 times after the
specimen without cracks, corner off defects, the rate of strength loss |
Bond strength(28days) |
≥2.0Mpa |
Skid resistance (wet and dry friction coefficient) |
≥0.5 |
Air cleanliness |
N7 ~ N9 level |
Green No harmful radioactive, no harmful volatiles, no pollution
Non-Flammable Ground Hardener,Non-Flammable Carborundum Floor,Anti-Static Carborundum Floor
Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com