Wooden doors and windows are an important part of the interior decoration style, but also an important means to create decorative atmosphere and effect, and occupy a large proportion in modern decoration projects. So, how to check the wooden doors and windows? Today Xiao Bian took everyone to learn about the construction of wooden doors and windows and the acceptance of wood doors and windows.
Wooden doors and windows construction specifications
(1) Flat open wooden doors and windows: The installation procedure for installing flat open wooden doors and windows is as follows:
1 Before installing windows and doors, determine the installation position of the door and window frame according to the 500 mm horizontal line from the ground and the coordinate reference line, and pop up the installation position line. Put the door and window frame on the installation position line, place it right, and fix it temporarily with a mold.
2 Align and straighten the door and window frame with a line sinker and level ruler, and fix the door window frame with a 100-mm nail on the tile embedded in the wall. The nail cap should be nailed into the frame after being flattened. There is no need to install a new door frame to renovate the old doors and windows, but the position of the door frame should pop up on the already wrapped door cover and the door frame must be nailed.
3 Put the door and window fan against the frame, plan the height and width of the door and plan it. After reaching the specified standard, remove the hinge slot, fix the hinge to the door and window fan, and install it on the door and window frame. The position of the hinge groove should be accurate to prevent the door leaf from twisting after being fixed.
(2) Suspended push-pull wooden doors and windows: Suspended push-pull doors and windows are pulleys in the upper part of the doors and windows, and the lower part is the sliding door opening and closing of the guide rails. Hanging type is mainly used for Sliding Doors. The installation procedures for hanging sliding wooden doors and windows are as follows:
1 When installing the hanging sliding door, the installation line of the upper beam, side frame plate and lower rail shall be determined according to the 500 mm horizontal line and coordinate reference line. Fasten the upper beam to the top of the door opening with screws and attach the side frame plate. Secure the side frame plate to the side of the hole wall with screws.
2 Remove the bolts and nuts from the hangers, place them on the I-beam guide rails, and fasten the I-beam guide rails to the bottom of the upper rails with screws. Fasten the lower rail with expansion bolts or plastic expansion tube screws. When installing the door leaf, first install the hanging bolt into the dedicated hole on the top of the door and use a wooden mold to level the door down the guide rail, and then use a nut to fix the hanging bolt and the hanging part, and check that the door edge matches the side frame plate. Fixed door stop, install the face.
(3)Deck push-pull door and window: The push-pull door and window is the sliding door and window of the pulley at the bottom of the door and window. It is mainly used for the installation of the sliding window. Its structure is shown in Figure 4-5. The installation procedure for the push-pull window is as follows:
1When installing the push-pull window, you should firstly use the elastic wire to determine the installation position of the upper, lower and side frame plates. Fix the lower frame plate on the bottom of the hole with screws and fix the side frame plate on the side of the hole wall with screws. The upper frame board is screwed to the top of the hole.
2 In the bottom frame plate, accurately mark the installation position of the steel slide chute. Use the screed to remove the wooden trough equal to the thickness of the steel skin on the frame plate, and use an adhesive to stick the steel chute to the wooden trough.
3 When installing the sash, the special wheel box is glued into the reserved hole under the sash at the bottom of the sash. After installing the window sash to the track, check whether the gap between the window edge and the side frame plate is equal to the width of the sash.
The correct procedure for acceptance of doors and windows
1, check the strength of doors and windows
The thickness, material and specifications of the door, and the tightness of the door; the material, size and thickness of the window, the type and thickness of the glass, and whether the switch of the interior design window is dexterous, convenient, and leak tight.
2, check the window function
A. The sliding of doors and windows is smooth, the surface is smooth and smooth, there are no serious scratches, and there are no cracks or fractures in the profiles.
B, gold accessories: complete, correct location, strong.
C. Sealing quality: When the doors and windows are closed, there are no obvious gaps between the fan and the frame. The Sealing Strip is not loose, does not come off, and is not exposed.
D. Door and window frame, fan vertical, not bent.
E. The glass is non-polluting and has no damage. The double glass sandwich has no dust and moisture, and the separator is even.
F. Whether the window drain hole has been opened. Unopened water will flow into the profile.
Door and Window Acceptance Tips
1. The verticality of the window frame: It is best to use a horizontal ruler to measure; You can also push the window sash to the position near the window frame, leaving a slight gap. At this time, you can see whether the gap between the upper, middle and lower is the same size. If the upper and lower gaps are the same, it means that the window frame is vertical; otherwise, the window frame is not vertical.
2, steel lining inspection: use the magnet on the form you want to check, can be adsorbed on the form, indicating that the manufacturer in the profile cavity plus steel lining, on the contrary there is no steel village. As for the thickness of the steel village, besides knowing it at the processing plant, you can also listen to the sound of steel hammer struck in the window frame by the electric hammer when the installer fixes the window frame.
3, the true and false identification of profiles: a look at the protective film on the surface of the profile; 2 to see if there is a security sign on the profile concave wall (so-called bar code), call the manufacturer of the profile on the protective film phone, according to the prompt quotations, you can get Knowing it is true.
4. Whether the window sash is slid on the window frame track, whether it is whispered (this depends on the quality of the pulley).
5, open series: open, off whether light; closed after the tight.
6. Whether the screen window is pushed or pulled is light and the walking is stable.
Xiao Bian summed up : wooden doors and windows construction specifications and the relevant content of wood doors and windows acceptance, Xiaobian first introduced to this. More exciting content, please continue to pay attention to this site.
Wall Acceptance Woodwork Acceptance Doors & Windows Acceptance Ground Acceptance Level Acceptance Acceptance
Glass folding door set is designed as one kind of exterior glass folding door, connected by hinges for folding door and moving by sliding roller hanging on a aluminum track. We will see this folding door sets in office or house balcony division, which could capture a great view of very corner.
Specification
1. Material: Stainless Steel 304
2. Finish: Polish or Satin
3. Suitable for glass thickness: 8-10mm
5. Max. door width: 900mm
6. Max. door height: 2100mm
7. Max. door weight: 100kg
Folding Door Accessories,Folding Door Hinges,Folding Doors Handles
Jiangyi Industrial Co., Ltd , https://www.cnjyhardware.com